ADP1707ACPZ-1.2-R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management Integrated Circuits) is an essential component found in both consumer electronics and industrial applications. When it comes to the Voltage Regulators, Linear is one of the most commonly used components in the power management systems. In this article, we will discuss the application field and working principle of the ADP1707ACPZ-1.2-R7 linear voltage regulator.

First and foremost, the most common application of ADP1707ACPZ-1.2-R7 is for 5V to 12V step-up applications. It is an ideal solution for boosting voltage from low levels such as 3.3V to levels up to 12V. It is used with a wide range of applications such as microcontroller-based systems, IoT devices, motor control systems, and automotive systems.

On the technical side, the ADP1707ACPZ-1.2-R7 linear voltage regulator uses a control loop to maintain output voltage accuracy and regulate line/load transients. Its input voltage range is 2.7V to 5.5V, and it can provide an output current of 800mA with a ripple rejection ratio of 50dB or better.

The ADP1707ACPZ-1.2-R7 linear voltage regulator features an enable, fault, and power-good output signal to indicate the status of the regulator. It has a wide temperature range of -40°C to +85°C and is rated for an operating temperature of -40°C to +125°C. Additionally, it has an efficiency rating of 86%.

The working principle of the ADP1707ACPZ-1.2-R7 linear voltage regulator is relatively simple. The input voltage is applied to the input terminals, and the output voltage is regulated by a feedback loop, which is compared against a reference voltage. The error signal is used to drive a series of transistors, which then adjusts the output voltage to the desired set-point.

The ADP1707ACPZ-1.2-R7 linear voltage regulator offers a wide input voltage range, an 800mA output current capacity, and more than sufficient Ripple rejection Ratio of 50db paired with its efficient performance. These features make it a great choice for many applications.

Overall, the ADP1707ACPZ-1.2-R7 linear voltage regulator is an excellent choice for 5V to 12V step-up applications. Its wide range of features make it an ideal solution for motor control systems, automotive systems, microcontroller-based systems, and more. It uses a control loop to maintain output voltage accuracy, has an input voltage range of 2.7V to 5.5V, and a maximum output current of 800mA. Additionally, it features an enable, fault, and power-good output signal to indicate the status of the regulator and has an efficiency rating of 86%.

The specific data is subject to PDF, and the above content is for reference