ADP1764ACPZ0.95-R7

Voltage Dropout (Max):	0.075V @ 4A
Base Part Number:	ADP1764
Operating Temperature:	-40°C ~ 125°C (TJ)
Protection Features:	Current Limit, Thermal Overload
Control Features:	Enable, Power Good, Soft Start
PSRR:	69dB ~ 35dB (10kHz ~ 1MHz)
Current - Supply (Max):	23mA
Current - Quiescent (Iq):	17mA
Current - Output:	4A
Series:	--
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	0.95V
Voltage - Input (Max):	1.98V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Positive
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADP1764ACPZ0.95-R7 Application Field and Working Principle

The ADP1764ACPZ0.95-R7 voltage regulator is categorized as a linear voltage regulator. It is a module that can provide a constant output voltage and maintain a constant output over a range of input voltages.

Application

The ADP1764ACPZ0.95-R7 voltage regulator is often used in a wide variety of consumer electronics and communication systems. It can be used in consumer products such as smartphone, tablet and laptop computers. It can also be used in small industrial and medical systems and applications.When using the voltage regulator, it is important to consider the range of input voltages that it can accept, as this will affect its ability to provide a constant output voltage. The ADP1764ACPZ0.95-R7 has an input voltage range of 2.5V to 18V and can provide a stable output under any input voltage condition.

Working Principle

The working principle of the ADP1764ACPZ0.95-R7 voltage regulator is based on a three-terminal voltage regulator. The three terminals are the input voltage, output voltage and ground. When an input voltage is applied, the voltage regulator will compare the input voltage with the output voltage. When the two voltages are not equal, the voltage regulator will adjust the output voltage to keep them in line.The voltage regulator is designed to maintain a stable output voltage even if the input voltage varies. This is done by using a reference voltage to detect the variations in the input voltage and make corrections. When the input voltage is higher than the desired output voltage, the voltage regulator will reduce the output voltage to compensate for the difference. Conversely, when the input voltage is lower than the desired output voltage, the voltage regulator will increase the output voltage to compensate for the difference.The voltage regulator is also designed to provide protection from overcurrent, reverse polarity and transient surges. Overcurrent protection prevents excessive current from reaching the output voltage, while reverse polarity protection prevents negative current from flowing into the voltage regulator. Transient protection is provided by using a low-pass filter to dampen sudden electrical spikes.

Conclusion

The ADP1764ACPZ0.95-R7 voltage regulator is an essential component of many consumer electronics and communication systems. It is designed to provide a stable output voltage over a range of input voltages and is protected from overcurrent, reverse polarity and transient surges. Its three-terminal design ensures that it can maintain a constant output voltage and make necessary corrections when the input voltage varies.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description