AHA158M06G24T-F

Series:	AHA
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	1500µF
Tolerance:	±20%
Voltage - Rated:	6.3V
ESR (Equivalent Series Resistance):	400 mOhm @ 120Hz
Lifetime @ Temp.:	2000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Polarization:	Polar
Ratings:	AEC-Q200
Applications:	Automotive, Bypass, Decoupling
Ripple Current @ Low Frequency:	480mA @ 120Hz
Ripple Current @ High Frequency:	816mA @ 10kHz
Lead Spacing:	--
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.402" (10.20mm)
Surface Mount Land Size:	0.406" L x 0.406" W (10.30mm x 10.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors belong to the category of wet-type capacitors, and are constructed with electrolyte-soaked paper as the core and thin aluminum foil as the electrodes. They are made of a very thin aluminum oxide layer with an anode of aluminum foil, serving as a dielectric. The semi-permeable oxide layer acts as the “gate” for ions to pass and act as a barrier for electrons. The casing is sealed with epoxy resin with a number of pins and terminals, allowing it to be mounted on a printed circuit board. Due to their use as a high-performing electrical component, their abilities can be further tailored to fit various application fields, such as the AHA158M06G24T-F.

Application Field of AHA158M06G24T-F

The AHA158M06G24T-F aluminum electrolytic capacitor is primarily used for power supply circuits. As an electrolytic capacitor, it is highly efficient in rectifying AC power current to provide a stable DC voltage, which is essential for stable, reliable power supply circuits. Its high capacitance and low series resistance can provide an extremely stable power current as well. Moreover, the AHA158M06G24T-F aluminum electrolytic capacitor’s capacitance can be further tailored to fit its application field. Its small package size of 8mm diameter and 24.5mm length also helps put it in a prime location for mounting onto a printed circuit board. With its higher dielectric strength, it can be used for a wider temperature range, which makes it perfect for the high-current power supply circuits.

Working Principle of AHA158M06G24T-F

AHA158M06G24T-F aluminum electrolytic capacitors work with a principle similar to other basic capacitors. It stores up electrical energy when an electric potential is applied between the two electrodes, materialized by a dielectric and basis electrolyte medium. In the case of the AHA158M06G24T-F, the electrolyte is typically an aqueous KOH solution with a thin oxide layer acting as the dielectric medium at the interface. This same oxide layer acts as the semi-permeable gate for ions to pass, providing a driving force for electricity to flow through the capacitor.In operation, the AHA158M06G24T-F aluminum electrolytic capacitor stores electrical energy when it is charged with an initial voltage. When power is discharged through the capacitor, this voltage begins to decrease and the stored electricity starts to be dissipated as heat. The capacitance and ability of the AHA158M06G24T-F to handle current without degrading means that it can be used in power supply circuits without a problem.

Conclusion

The AHA158M06G24T-F aluminum electrolytic capacitor is designed to fit power supply circuits, and it does so efficiently with its high capacitance-resistance ratio. Its small package size and constructed dielectric layer also make it ideal for mounting onto smaller printed circuit boards or direct cable connectors. Finally, its capability to be charged and discharged with electrical energy make it a reliable component in power supply circuits and other applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description