AN8006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AN8006 is a linear voltage regulator, designed to provide precision power supply lines for a wide range of applications, including portable and mobile devices. It can provide protection against overload, overvoltage, overcurrent, and short circuit protection for the output voltage.

The AN8006 is composed of a voltage reference, an error amplifier, a power field effect transistor, a current limit circuit and thermal shutoff circuits. It offers a low-dropout linear regulator operating from a 2.5V to 10V input voltage range, with current capability up to 2A. The AN8006 can also support up to 3.6V of output voltage and ripple rejection of 70 dB.

The working principle of AN8006 can be divided into three main stages: the reference voltage stage, the error amplifier stage and the power field effect transistor stage. The reference voltage stage consists of a reference voltage source, a bias resistor, a voltage divider and a temperature compensated zener diode. Its input voltage is set by the voltage divider and it is used to set the output voltage of the regulator. During operation, the reference voltage is monitored and the error amplifier will compare the reference voltage with the output voltage.

In the error amplifier stage, the differential output voltage of the amplifier is proportional to the difference between the input and output voltages. The error amplifier is then connected to the power field effect transistor which is used to control the load current. The power field effect transistor is an N-channel MOSFET, and its output current is proportional to the difference between the gate voltage and the input voltage.

The AN8006 also offers overcurrent protection, which is implemented by a current limit circuit. The current limit circuit monitors the load current, and if it exceeds the preset limit, the current limit circuit will shut down the FET, preventing the output from going over the current limit.

Finally, the AN8006 also features thermal shutdown protection. Thermal shutdown protection is important for any power supply, since too much heat can cause permanent damage to the chip. Thermal protection is implemented by monitoring the chip\'s temperature through an internal temperature sensor, and if it gets too hot, the chip will shut down, providing thermal protection for the chip.

The AN8006 is a great device for many applications, especially those that require reliable and precise power supply lines. With its wide input voltage range, current capability up to 2A, and ripple rejection of 70 dB, the AN8006 is a great choice for many applications. Additionally, it offers protection against overload, overvoltage, overcurrent, short circuit, and thermal shutdown, making it a good choice for protecting the output voltage.

The specific data is subject to PDF, and the above content is for reference