AT24C11-10PU-1.8

The AT24C11-10PU-1.8 is a memory component that’s typically used in embedded systems. It’s a versatile component that can be used in many applications, from consumer electronics to industrial applications. In this article, we’ll explore the application field and working principle of the AT24C11-10PU-1.8.

The AT24C11-10PU-1.8 is a serial 2-wire EEPROM (Electrically Erasable Programmable Read-Only Memory). It’s a non-volatile memory component, which means that it stores data even when there’s no power. It has an integrated 2-wire bus interface, which is used for data and clock signals.

The AT24C11-10PU-1.8 is used in many different applications. It’s commonly used in consumer electronics, such as TV remotes, digital cameras, and mp3 players. It’s also used in industrial applications, such as industrial controllers and robotics.

The AT24C11-10PU-1.8 has a maximum operating temperature of 85°C and a minimum operating voltage of 1.8V. The component is available in a variety of different packages, including SOIC, TSSOP, and MSOP.

The AT24C11-10PU-1.8 uses a serial 2-wire bus, which is a synchronous serial data link protocol. The 2-wire bus consists of two lines: the serial data line (SDA) and the serial clock line (SCL). The serial data line is used to transmit and receive data, while the serial clock line is used to synchronize the data transmission.

The AT24C11-10PU-1.8 supports multiple communication protocols, including I2C and SPI. I2C (Inter-Integrated Circuit) is an asynchronous serial communication protocol, while SPI (Serial Peripheral Interface) is a synchronous serial communication protocol.

The AT24C11-10PU-1.8 supports multiple modes of operation. It can operate in master mode, in which it is responsible for initiating data transfers, and in slave mode, in which it responds to master requests. It can also operate in multiple device mode, in which multiple components can be connected to a single bus.

The AT24C11-10PU-1.8 can store up to 1k bytes of data. The data is stored as 8-bit bytes, and the component can be accessed using an address pointer, which points to the next memory location to be accessed. The component also supports page write operations, which allow multiple bytes of data to be written at once.

The AT24C11-10PU-1.8 is a versatile component that can be used in a variety of applications. Its supports multiple communication protocols, multiple modes of operation, and page write operations, which make it an ideal choice for embedded systems. It’s also an affordable component, which makes it a popular choice for many applications.