AT24C21-10SI-2.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT24C21-10SI-2.5 belongs to the memory category and has a wide range of applications, from industrial to consumer products. It is a Serial EEPROM device (also called an electronically erasable programmable read-only memory or EEPROM) with a storage capacity of 2048-bits (256 bytes). The device utilizes either a two-wire, I2C compatible communications interface, with addresses up to 32, or a one-wire, Microwire compatible interface, allowing multiple devices to be addressed on a single bus with a minimum of signals.

AT24C21-10SI-2.5 uses the world’s most advanced CMOS Floating Gate EEPROM technology, which delivers significant performance enhancements, including faster write speeds, higher endurance, and less power consumption. This technology allows for up to 10,000 write/erase cycles and an operating voltage range of 1.8V to 5.5V, making it suitable for a variety of applications.

The AT24C21-10SI-2.5 can store up to 256 bytes of data and is organized with 8-bit data bytes and 16-bit word addresses. The device is also equipped with a hardware write protect pin, which prevents writes to the device until the pin is set to logic high. The device provides two methods of write protection, block write protection and byte write protection, and also offers an enhanced band gap write enable and a write verification mode. The device also features a self-timer which provides delays when writing data to allow the internal circuitry to stabilise before data is written.

The working principle and basic functions of AT24C21-10SI-2.5 involve both the electronic circuits on the chip and the operation instructions. The electronic circuits in the chip are responsible for detecting the instruction instructions issued by the external, judging whether there is data flow and data reset between the memory and the read/write unit, receiving/outputting data, controlling the program flow of data, and recognizing the internal/external communications address. The operation instructions of this chip can be understood as the commands issued by the memory to accept external instructions. It includes functions such as addressing mode selection, data transfer operation and status read operation. When the chip is started, it recognizes the valid instruction input, which is generally issued by the outside control unit, and then the instruction decoding circuit determines whether the instruction is valid and allocates the data to designated memory locations.

In summary, AT24C21-10SI-2.5 is a type of Serial EEPROM device with a storage capacity of 2048-bits (256 bytes) and a wide range of applications. It is designed with advanced CMOS Floating Gate EEPROM technology, which provides it with good performance, higher endurance and less power consumption, and it also features self-timer and write protect pin for added protection and enhancement. The working principle and basic functions of this chip involve both the electronic circuits on the chip and the operation instructions.

The specific data is subject to PDF, and the above content is for reference