AT24C512-10UI-2.7

Write Cycle Time - Word, Page:	10ms
Base Part Number:	AT24C512
Supplier Device Package:	8-dBGA (4.07x2.47)
Package / Case:	8-VFBGA
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Voltage - Supply:	2.7 V ~ 5.5 V
Memory Interface:	I²C
Access Time:	550ns
Series:	--
Clock Frequency:	1MHz
Memory Size:	512Kb (64K x 8)
Technology:	EEPROM
Memory Format:	EEPROM
Memory Type:	Non-Volatile
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory: AT24C512-10UI-2.7 Application Field and Working Principle

The AT24C512-10UI-2.7 is a 2.7 Volt electrically erasable programmable read-only memory (EEPROM) with a capacity of 512 kilobits. It is ideal for medium density applications that require a reliable nonvolatile storage solution. This type of memory is available in various packages and can be used for a variety of applications, including automotive, consumer, industrial, and telecom applications.

Application Fields

The AT24C512-10UI-2.7 is used in a wide range of applications requiring reliable non-volatile storage solutions. These memory units can be used in a variety of consumer electronic devices including digital cameras, PDAs, CD players, and other portable devices. In addition, they can also be used in automotive applications such as engine control systems, car navigation systems and automotive entertainment systems. Medical equipment and telecommunications equipment also rely on the AT24C512-10UI-2.7 for reliable storage solutions.

Working Principle

The AT24C512-10UI-2.7 is a two-wire serial EEPROM that utilizes a two-wire serial interface. It operates at a maximum frequency of 400KHz and has a wide operating temperature range of -40°C to +85°C. It is organized as 512K bits of memory and can be accessed 32 bytes at a time. Each device is equipped with an on-chip 8-bit device address. This allows up to 254 devices to be connected on a single bus.The AT24C512-10UI-2.7 works by storing data in an array of non-volatile Flash cells. Data is written and read serially by an external device such as a microcontroller. Writing to memory is achieved by supplying the appropriate data and write cycles to the device. On other hand, reading from memory is achieved by supplying the appropriate data and read cycles. Data can also be read or written byte-by- byte using the master/slave protocol. In addition to reading and writing data, the AT24C512-10UI-2.7 can be configured to operate in one of two modes – Continuous Read and Burst Read. The Continuous Read mode enables data to be read continuously while the Burst Read mode enables data to be read in blocks of 32 bytes at a time. Data is stored in Flash cells which can be programmed and erased. Programming is achieved by the application of an electrical signal to the Flash cell and requires the application of write cycles. Erase is achieved by applying an electric field and requires the application of erase cycles. The AT24C512-10UI-2.7 is one of the most reliable non-volatile memory solutions currently available. It it has a wide variety of applications across different industries and provides a reliable data storage solution that can handle a wide range of conditions and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description