AT93C46-10PI-2.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT93C46-10PI-2.5 is a member of the memory series of products from Atmel Corporation, which consists of EEPROMs and Serial EEPROMs. The product, also known as AT93C46-10PI-2.5, is a 1 Kb SPI Serial EEPROM with a 3V supply voltage. It is available in 8-pin PDIP, 8-pin SOIC, 8-pin TSSOP, or 8-pin leadless chip carrier packages. This device is a low cost, low power, electrically erasable, 2-wire interface, 1 Kbyte memory array.

The main application field of AT93C46-10PI-2.5 is the Electrically Erasable Programmable Read Only Memory (EEPROM) chip. It is specifically designed for use in data logging, system configuration, security, and other data storage applications. It is also used in industrial and medical applications where data must be stored securely. Furthermore, AT93C46-10PI-2.5 can be used as a calibration and test system component because of its low power and wide temperature range.

AT93C46-10PI-2.5 primarily works on the principle of non-volatile memory. Non-volatile memory is designed so that data remains stored even when the power is removed or turned off. This makes it suitable for applications where data must be preserved, even if power is lost. The AT93C46-10PI-2.5 is an EEPROM that is able to remember data even after power down and/or power cycling. Further, the device incorporates several data protection features such as write protect and erase-all.

The AT93C46-10PI-2.5 is suitable for a variety of applications and is programmed using a standard two-wire interface (Serial Peripheral Interface bus (SPI). SPI is a full-duplex serial interface that uses a master-slave communication protocol. With this device, data can be written to and read from the memory with very low power consumption. The device is fully compatible with Atmel\'s serial EEPROM family, including the AT93C46-10PI-2.5, and is available with a wide variety of package types.

In summary, the AT93C46-10PI-2.5 is a low cost, low power, electrically erasable, 2-wire interface, 1 Kbyte memory array. It is suitable for applications such as data logging, system configuration, security, and other non-volatile data storage applications. The device is programmed using a standard two-wire interface (Serial Peripheral Interface bus (SPI)), and its main application field is the Electrically Erasable Programmable Read Only Memory (EEPROM) chip.

The specific data is subject to PDF, and the above content is for reference