AT93C86A-10SI-2.7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT93C86A-10SI-2.7 is an 8-bit, 2K (16,384 Bit) Serial EEPROM memory chip that provides the capability of serial data communication for processor-to-memory and memory-to-memory applications. An on-chip address counter simplifies programming, and ensures that each byte is correctly classified. It is a non-volatile memory device, meaning it retain its contents even if power is turned off.

The AT93C86A-10SI-2.7 belongs to the Memory category. It is often used in applications that require storing large amounts of data and quickly accessing it. This includes automotive electronics, mobile phone handsets, PC motherboards, industrial control systems, and medical electronics.

The working principle of the AT93C86A-10SI-2.7 is based on three main components: the integrated circuit (IC), the enable/write (E/W) input, and the data I/O lines. The IC consists of two parts: the logic circuits and the memory array. The logic circuits are responsible for controlling the operation of the device. They detect start, stop and write signals and generate the appropriate timing signals. The memory array consists of 16,384 bits electrically programmed and arranged in 256 locations of 16 words each. It provides storage for up to 8-bit data.

The E/W pin enables the device to store data in the memory array. When this pin is high, data can be written into the memory array. When this pin is low, the memory array is put in a read-only mode, which means that only data that was previously stored can be read. The data I/O lines are used for inputting data into and outputting data from the memory array. Data is read and written using the SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit) or Microwire bus protocol.

In summary, the AT93C86A-10SI-2.7 belongs to the Memory category and is used for storing large amounts of data and quickly accessing it. The working principle of this device is based on three main components: the integrated circuit, the enable/write input, and the data I/O lines. Data is read and written using the SPI, I2C or Microwire bus protocol.

The specific data is subject to PDF, and the above content is for reference