AT93C46A-10PI-2.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory devices are a type of integrated circuit that is used to store digital data. One such device is the AT93C46A-10PI-2.5, a Serial Electrically Erasable Programmable Read-Only Memory (EEPROM). This article will look at the application fields and working principles of this particular device.

An EEPROM is a non-volatile type of semiconductor memory. It is useful in the storage of short lived data, or data that is likely to be constantly overwritten, such as user preferences and settings data in embedded systems. The AT93C46A-10PI-2.5 is a 3-wire device, which means it has one data line and two control lines.

The EEPROM is generally used in embedded systems and industrial applications where data needs to be rewritten easily and quickly. The device is also suitable for use in automotive systems where frequent data updates are required. Of particular note is the device’s ability to operate over a wide temperature range, making it an ideal choice for applications that experience extreme temperatures.

The AT93C46A-10PI-2.5 can store up to 128 bits of data, with a total memory size of 8 kilobits. This can be divided into 16 independent blocks, each of which can be addressed individually. The device features a write protect pin, which prevents accidental data overwrites.

The EEPROM is a three-wire serial device, meaning data is transferred serially on the data line. Acknowledge signals, start signals and write control signals are transferred on the two control lines. The EEPROM features an auto-address mechanism, allowing data to be transferred rapidly.

Data is written and erased in blocks of memory, rather than one bit at a time. This allows for faster writing and erasing times, as the whole sector of data needs to be sent just once. Writing requires the use of write enable signals, which tell the device when data can be written to it. Data can also be erased in single or bulk operations.

In order to read data from the EEPROM, the device needs to be in read mode. This is done by setting the start bit to a logic 1, and the write enable inputs to 0. Data can then be clocked out of the device, eight bits at a time. The data is transferred on the falling edge of the clock pulse.

The AT93C46A-10PI-2.5 is a reliable and efficient memory device which is suitable for use in many embedded systems and industrial applications. The device features a wide temperature range, write protect pin and high-speed data transfer capabilities. It is also capable of storing up to 8 kilobits of data, making it an excellent choice for data storage needs.

The specific data is subject to PDF, and the above content is for reference