AVS107M35F24B-F

Series:	AVS
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Discontinued at Digi-Key
Moisture Sensitivity Level (MSL):	--
Capacitance:	100µF
Tolerance:	±20%
Voltage - Rated:	35V
ESR (Equivalent Series Resistance):	2.3 Ohm @ 120Hz
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	AEC-Q200
Applications:	Automotive, Bypass, Decoupling
Ripple Current @ Low Frequency:	140mA @ 120Hz
Ripple Current @ High Frequency:	238mA @ 10kHz
Lead Spacing:	--
Size / Dimension:	0.315" Dia (8.00mm)
Height - Seated (Max):	0.402" (10.20mm)
Surface Mount Land Size:	0.327" L x 0.327" W (8.30mm x 8.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are one of the most commonly used capacitors in electronics, and AVS107M35F24B-F is one of its typical models. This type of capacitor is mainly used in the field of power electronics to store energy. In this paper, I will discuss further the application field and working principle of AVS107M35F24B-F aluminum electrolytic capacitor.

The Application Field and Working Principle of AVS107M35F24B-F Aluminum Electrolytic Capacitors

The Application Field

1. AVS107M35F24B-F aluminum electrolytic capacitors are widely used in power electronics, mainly in switching power supply, motor drive, rectifier inverter, electronic ballast, power converters and so on, to fill the storage capacity gap caused by the load changes. 2. AVS107M35F24B-F aluminum electrolytic capacitors can also be used as storage component in computer main board, because the ability of these capacitors to remain stable in temperature and humidity is quite impressive. 3. AVS107M35F24B-F aluminum electrolytic capacitors can be also used in Hi-Fi audio equipment. It can provide higher stability and audio performance compared with other kinds of capacitors, especially when large amounts of energy are needed.

The Working Principle

AVS107M35F24B-F aluminum electrolytic capacitors are constructed with three parts: a solid aluminum anode, an electrolyte, and an aluminum oxide or tantalum oxide cathode. When an AC voltage is applied, the anode and cathode form an electric field that induces a current in electrolyte. Most of the current is discharged to the cathode, and the remaining current is stored in the anode as electrical energy. The AC voltage is blocked by the electrolyte, the anode forms very small positive ions, and the cathode forms very small negative ions. The anode and the cathode form a capacitor and these ions help to store the electrical energy.The electrolyte also helps to reduce the capacitance of the capacitor with increasing temperature. When the capacitor is charged up, the capacitance is high. As it discharges, the capacitance decreases, and eventually it reaches its minimum value. This behavior is known as capacitance reversal. The capacitance reversal helps to maintain the stability of the capacitor.The capacitance of AVS107M35F24B-F aluminum electrolytic capacitor is very high, ranging from 25000 to 200000 μF, so it can store a huge amount of energy.

Conclusion

AVS107M35F24B-F aluminum electrolytic capacitor is one of the most widely used capacitors in power electronics. It has a high capacitance, which can store a huge amount of energy, so it is often used to fill the storage capacity gap caused by the load changes. It also has good stability in temperature and humidity, so it is suitable for computer main board and audio equipment applications. The working principle of AVS107M35F24B-F aluminum electrolytic capacitor is that an AC voltage is applied to the anode and cathode and current is induced in electrolyte. The capacitance reversal helps to store the electrical energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description