B41505A5109M000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are widely used in many applications due to their low cost and wide range of available sizes and capacitances. The B41505A5109M000 is a variation of these capacitors. It is a radial lead Electronic Component rated at 16V with a maximum diameter of 10.2mm and a height of 9.5mm. It has long dielectric lifetime and high volumetric efficiency. The B41505A5109M000 is suitable for applications which require a high ripple current and large capacitance, including DC power supplies, audio-frequency motor controls, and automotive applications.

The aluminum electrolytic capacitor consists of an aluminum oxide layer that serves as the dielectric. The aluminum oxide layer is formed when aluminum is plated onto an aluminum foil. The upper and lower sides of the foil are then wound into a roll, and a layer of semi-solid electrolyte is applied between them. The electrolyte serves both to fill any gaps in the dielectric layer and to provide ions which are the charge carriers for the electric field. These two components, along with the aluminum foil, make up the capacitor.

The capacitance of the B41505A5109M000 is dependent on several factors. The voltage across the capacitor and the size and type of dielectric chosen will determine the capacitance. The amount of voltage applied to the B41505A5109M000 is typically limited to 16V. Additionally, higher operating temperatures can reduce the effective capacitance of the device. The maximum capacitance available with the B41505A5109M000 is 9.5μF.

The working principle of the B41505A5109M000 is just like that of other aluminum electrolytic capacitors. When a voltage is applied across the capacitor, some of the electrons from the aluminum foil will move to the electrolyte. This movement of electrons forms a charge on the electrolyte and creates an electric field which stores energy in the capacitor. The stored energy is used when the voltage across the capacitor is reduced and the electrons flow back to the aluminum foil.

The B41505A5109M000 is an ideal component for applications requiring a high ripple current and large capacitance such as DC power supplies, audio-frequency motor controls, and automotive applications. Its long dielectric lifetime means that it won’t need to be replaced as often as other similar components, making it a cost-effective choice. The B41505A5109M000 is also easily mountable, making it an ideal choice for small-scale electronics.

The specific data is subject to PDF, and the above content is for reference