B43305A5826M87

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors utilize a process of electrolyte absorption on etched aluminum foil to store a charge. The B43305A5826M87 is a capacitance component that boasts superior quality, dependability and a long service life. It operates within the range of -55°C to +105°C. The B43305A5826M87 is an aluminum electrolytic capacitor with a capacitance of 47000Uf, a voltage rating of 25v DC and a tolerance of 20%.

The primary application for the B43305A5826M87 is in motors and generators. As these motors or generators are being operated, the capacitor starts to filter out the electrical noise due to the start-up operation. This enables the motor or generator to be more efficient and reliable in operation, increasing its service life.

In terms of how the B43305A5826M87 works, the aluminum case is equipped with two pins, which enable it to connect to the circuitry of the motor or generator. Inside the aluminum case there are two metal plates, one positive and one negative, which are separated by an electrolyte. When a voltage is applied to the pins, a reaction takes place in the electrolyte which causes an electron transfer from the positive plate to the negative plate, which is then stored in the capacitor.

The B43305A5826M87 is a polarized capacitor which means that when it is connected to the circuitry, the position of the pins must match the corresponding positive and negative symbols. It is also important to note that a capacitor is a passive component, so its parameters of capacitance and voltage rating must match the voltage applied to the motor or generator. If not, the capacitor may get damaged.

In conclusion, the B43305A5826M87 is an aluminum electrolytic capacitor that is primarily used in motors and generators to filter out electrical noise during start-up. It operates within the range of -55°C to +105°C with a capacitance of 47000Uf, a voltage rating of 25v DC and a tolerance of 20%. Since it is a polarized capacitor, it is important to connect it correctly in order to ensure that the capacitor is not damaged.

The specific data is subject to PDF, and the above content is for reference