BC807-40W/MIX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BC807-40W/MIX is a PNP, low-noise, general purpose BJT (bipolar junction transistor), classified as a single type. It is one of the most popular transistors because of its affordability and availability. This transistor can perform both digital and analog signal processing. It is also known for its very low noise figure, meaning it is suitable for signal-amplification applications where there is a need for low noise operation. In many applications the BC807-40W/MIX can be used instead of a more expensive transistor with a similar characteristics. Its switching Frequency can reach up to 200 MHz.

The BC807-40W/MIX features a maximum power dissipation of 150 mW and a maximum collector current of 1 A. It has a maximum DC collector-emitter voltage of 80 V and a maximum operating temperature of 150 (degree)C. The BC807-40W/MIX has a fast switching time, a low voltage base-emitter saturation voltage, and a low collector-emitter saturation voltage. These features make it suitable for a variety of applications, including audio frequency amplifiers, general purpose digital circuitry and switching devices. This fast switching transistor is found in almost all areas of digital and analogue electronics.

The BC807-40W/MIX is an NPN type transistor which consists of three parts: the base, the collector and the emitter. It consists of two PNP transistors coupled to each other with their collector junctions connected in series. When the base-emitter junction is forward biased, the collector current flows from the collector to the emitter. At the same time, when the base-collector junction is reverse biased, the base current is lower while the collector-emitter current is higher.

The working principle of the BC807-40W/MIX is based on the Collector-Emitter current-voltage characteristic. This characteristic defines the current-gain (hFE) between the base and emitter terminals at a given voltage. When the base-emitter voltage (VBE) is greater than the base-collector voltage (VBC) by a certain amount, the Collector-Emitter (CE) current will begin to increase dramatically. This increase in current known as the saturation region and occurs when the emitter current is at its peak. This saturation region is important because it allows the transistor to be used as a switch.

The BC807-40W/MIX has a wide range of applications, from digital circuits, to audio frequency amplifiers, analog switching, low-noise amplifiers and many more. It can be used in various combinations with other transistors to build complex circuits. It is also commonly used in DC power supplies and audio preamplifiers. Its fast switching feature makes it suitable for operating at high temperatures, which is advantageous for many applications.

The BC807-40W/MIX is an excellent choice for a wide variety of general-purpose BJT applications. Its low noise figure, combined with its fast switching time, make it ideal for low-noise applications. Furthermore, its affordability and availability make it one of the most popular transistors on the market.

The specific data is subject to PDF, and the above content is for reference