BCR 179L3 E6327

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The traditional BCR 179L3 E6327 single pre-biased transistor is widely used in electronic and engineering applications. The device is used primarily in low-voltage, low-power applications, such as small electronics, sensors, and power supplies. BCR 179L3 E6327 transistors are also commonly used in consumer electronics and automotive applications.

A bipolar junction transistor (BJT) is a type of current-controlled transistor. These transistors are composed of two doped semiconductor layers--a base and a collector--closed by a thin base region. A positive charge, or bias voltage, is applied to the base region, and also to the collector terminal. The magnitude of the voltage across the collector controls the amount of current that is allowed to flow from the collector to the emitter.

The BCR 179L3 E6327 is a single pre-biased transistor, meaning that it comes with the bias voltage already applied to it, making it easier to hook up to a circuit. It provides a fast switching time of about 35 nanoseconds and a low noise figure of 6 decibels. The device also has a voltage gain of 50, allowing it to be used in audio applications.

The BCR 179L3 E6327 has a very low saturation voltage of around 0.2 volts, and it can be used with a wide range of base voltages. It uses a wide range of collector current ranging from 1 ampere to 2 amperes. The device is typically used in applications with lower power requirements, such as fast switching or low power audio circuits.

The main advantage of the BCR 179L3 E6327 is its low cost and ease of use. It is well suited for a wide range of applications, from consumer electronics and automotive applications to more specialized applications, such as sensors and power supplies. The device is also easy to configure, as it requires no special equipment or complex set up.

The working principle of the BCR 179L3 E6327 is relatively simple. When a positive charge is applied to the base, it creates a forward voltage bias between the base and the collector, allowing current to flow from the collector to the emitter. The magnitude of the current is determined by the voltage bias and the characteristics of the transistor. As the voltage bias increases, the current flowing through the emitter is increased. In addition, the gain of the device is determined by the ratio of the base to the collector current.

The BCR 179L3 E6327 is a useful device for a range of electronic applications. Its low cost and simple set up make it an attractive option for those looking for a low-power and low-cost transistor. It is suitable for use in low-voltage, low-power applications, such as small electronics, sensors, and power supplies.

The specific data is subject to PDF, and the above content is for reference