BT169D/DG,126

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors – SCRs are a type of power semiconductor device used in electronics to control the flow of electricity. They are commonly used in applications such as motor control, power switching, motor speed control, timers, and voltage regulation. The BT169D/DG126 SCR has a number of advantageous characteristics that make it suitable for many applications.

Basic Structure and Design

The BT169D/DG126 SCR has a traditional four-layer structure and is composed of the following components: a gate, a cathode, an anode, and an etch section. The anode and cathode are the two main terminals. When a positive voltage is applied to the gate, the SCR will turn on and allow current to flow through it. The etch section is needed to allow the current to be cut off when the gate voltage is dropped.

Applications

BT169D/DG126 SCRs are used in a variety of applications such as motor control, power switching, voltage regulation, and timing. In motor control, the SCR can be used to control the speed or direction of the motor by controlling the amount of current that flows through the motor. This is accomplished by adjusting the voltage applied to the SCR’s gate. In power switching applications, the SCR is used to switch power on or off. The SCR can also be used as a voltage regulator by controlling the amount of current that flows through the power supply. Finally, the SCR can be used as a timer by controlling the amount of time the power supply is on.

Working Principle

When a certain threshold voltage of approximately 0.6 to 1 volt is applied to the gate of the BT169D/DG126 SCR, the gate junction is forward-biased and the SCR turns on. This turns on a low-resistance path between the anode and cathode, allowing current to flow between them. When this voltage is applied, the SCR will continue to conduct until the current drops below a certain threshold. Once this happens, the SCR will turn off and the current between the anode and cathode will be cut off.

Summary

The BT169D/DG126 SCR is a four-layer power semiconductor device which is used for a variety of applications ranging from motor control to power switching and voltage regulation. It works by allowing current to flow between the anode and cathode when a threshold voltage is applied and cutting off the current when the current drops below a certain level. The BT169D/DG126 SCR has many advantageous characteristics which make it a suitable choice for many applications.

The specific data is subject to PDF, and the above content is for reference