CC2510F8RSPG3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Texas Instruments (TI) CC2510F8RSPG3 is a low power, System-on-Chip (SoC) transceiver device which combines a true singles status antenna diversity, an internal MCU, and a digital baseband modem. The CC2510F8RSPG3 transceiver is a general purpose RF Transceiver IC that represents the new-generation of multi-protocol transceivers. This transceiver has been designed with the ground-level wireless applications in mid to low range frequency (2.4GHz) and short-range wireless applications ranging up to 1 km.

This transceiver is suitable for a variety of applications such as wireless sensors, home automation, low-power networking, ZigBee applications, as well as wireless data acquisition and home security systems. The CC2510F8RSPG3 provides bidirectional data communication at very low power consumption, making it ideal for battery powered applications.

The main feature of the CC2510F8RSPG3 which makes it attractive for a variety of applications is its 255-bit variable-length of symbol rate and modulation scheme. This enables the user to customize the parameters of the transceiver to achieve the best performance for the intended application. Furthermore, the CC2510F8RSPG3 offers additional features such as pre-emphasis for enhanced performance at very low data rates, a low-power receive stand-by mode for energy conservation and an integrated Direct-Sequence Spread Spectrum (DSSS) for improved interference rejection making it suitable for wide-band applications.

Performance is also further enhanced through the incorporation of a special antenna diversity, which allows for the optimization of data communication under changing conditions. This feature helps to reduce errors, eliminate dead spots and provide a longer range for data communication.

The CC2510F8RSPG3 integrates a wide array of peripherals including 10-bit analog-to-digital converters (ADCs), a programmable 16-channel digital-to-analog converter (DAC), one real-time clock (RTC), a voltage regulator and a number of digital peripherals. The digital peripherals include four UARTs, two SPI ports, an I²C and a number of general purpose I/Os.

The CC2510F8RSPG3 also supports the TI SoC Low-Power Digital 1.8 V Standard to allow for low-cost, standard parts to be used in the board design. Furthermore, the transceiver supports over-the-air programming which is useful for customizing wireless options. The transceiver also contains an RF field test feature for easy debugging.

The CC2510F8RSPG3 transceiver works on the principle of frequency modulation (FM), a method of encoding data onto a carrier wave by modulating the wave’s frequency. The transceiver sends out a carrier wave with an amplitude modulated by the data it is sending. The receiver then uses an FM detector to demodulate the signal and decode the data that was transmitted.

The CC2510F8RSPG3 is designed to be compliant with the IEEE 802.15.4 standard. It provides support for all five of the physical layer (PHY) specifications that are in this standard and supports the latest development in the mesh networking protocol for reliable wireless data communication. These features make the CC2510F8RSPG3 an attractive candidate for low power and short-range wireless applications.

The specific data is subject to PDF, and the above content is for reference