CD4097BPWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD4097BPWRE4 is an analog switch, multiplexer, and demultiplexer integrated circuit produced by Texas Instruments, which can carry out signal routing tasks and operate with low power consumption. It is placed in the field of Interface: Analog Switches, Multiplexers and Demultiplexers.

The CD4097BPWRE4 device is made up of four independent, 2-channel switches. Each switch has two inputs, an In0 and an In1, as well as an output, Out0. By applying an Input Select Control signal (CS) to the switches, each In0 and In1 can be routed to Out0 corresponding to the applied voltage. The three signals, In0, In1, and CS are CMOS logic voltages.

The control signal makes it possible to route either of the two inputs to the output. When CS is Low, In0 is connected to the output and when CS is High, In1 is connected to the output. The Output can be held in either the Low or High state, depending on the voltage applied to the CS signal. Use of these two input switches in combination with two independent control lines creates four independent single-pole, double-throw switches.

In addition to its use as an analog switch and single-pole, double-throw switch, the CD4097BPWRE4 device can be used in applications requiring high efficiency and low power consumption, as it draws only a small amount of current while switches are enabled. Another application is multiplexing, which involves routing multiple inputs to a single output. This is done by connecting each of the four single-pole, double-throw switches to form one 4-input, 1-output multiplexer. This can then be used to select one of four inputs to be sent to one output.

The CD4097BPWRE4 device can also be used as a demultiplexer. A demultiplexer is the opposite of a multiplexer and takes an input from one line and routes it to multiple outputs. This can be achieved by connecting all four switches in a single line and routing one single-channel channel input to four outputs. By using an appropriate logic signal for the CS, the 8-channel channel output will become active.

With its ability to switch signal channels with low power consumption, coupled with its multiplexing and demultiplexing capabilities, the CD4097BPWRE4 is an invaluable addition to any signal routing and control application. It has the ability to route signals quickly and with great efficiency, making signal routing tasks easier than ever before. Its use in applications such as analog signal routing, multiplexers and demultiplexers ensures that signal routing becomes an easy and efficient process, freeing up time and resources previously dedicated to signal routing.

The specific data is subject to PDF, and the above content is for reference