CD74HC4316PWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HC4316PWRE4 is an analog switch IC, which includes four independent 2:1 multiplexer/demultiplexer modules. It is classed as an analog switch IC under Interface – Analog Switches, Multiplexers, Demultiplexers. Its active low enable pin selects the lower or the higher signal in the pairwise comparison, providing a wide range of applications. As such, understanding the working principles and applications of the CD74HC4316PWRE4 helps in its effective use.

The CD74HC4316PWRE4 is a CMOS integrated circuit whose logic compatible pins support enhanced operating same, superior noise and latch-up immunity. It is designed to operate from a single power supply in the range of 4.5V to 5.5V. The four outputs can operate with a power supply voltage of 2V to 5.5V. Furthermore, it features low on-resistance, low capacitance, low power dissipation and bidirectional protection against excess power supply and I/O pins.

The CD74HC4316PWRE4 IC features two four-bit binary inputs and four two-bit binary outputs with one common select line. The two main input bits are start and stop. The input bits to this device can be either true (logic 1) or false (logic 0). The logic signals from the start and stop lines can be applied to the device at the same time, generating the correct output pattern. Additionally, the device has high data transfer rates and compatibility with both digital and analog signals.

The CD74HC4316PWRE4 analog switch IC is used in a wide range of applications from buffering to level shifting, power management, and logic-level translating. It also supports digital signal switching and processing. The low on-resistance enables it to work effectively in applications like level shifters and multiplexers/demultiplexers.

The CD74HC4316PWRE4 features two main working modes, which are switched using the enable pin. The two modes are enabled and disabled. When the enable pin is pulled low, the enabled mode is active, allowing the start and stop bits to control the output. In the disabled mode, the start and stop bits are ignored, and the outputs are held at the logic level of the enable pin.

In terms of applications, the CD74HC4316PWRE4 analog switch IC is used in power management and signal routing devices. Its low on-resistance is ideal for buffering and signal switching applications. It is also used for applications like level shifting and voltage translation. It is particularly suited for applications that require the switching of both digital and analog signals.

The working principle of the CD74HC4316PWRE4 analog switch IC is simple. The enable pin can be pulled low or high, selecting either the enabled mode or the disabled mode respectively. In the enabled mode, the start and stop bits dictate the resulting output pattern, whereas the output is held in the disabled mode. The power supply range for the outputs is 2V to 5.5V.

In conclusion, the CD74HC4316PWRE4 analog switch IC is a versatile device with wide ranging applications. It is classified as an interface device under Analog Switches, Multiplexers, Demultiplexers due to its ability to switch analog and digital signals. Its working principle is simple and is easy to use and manipulate for its intended purpose.

The specific data is subject to PDF, and the above content is for reference