CDBD10150-G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	150V
Current - Average Rectified (Io) (per Diode):	10A (DC)
Voltage - Forward (Vf) (Max) @ If:	1V @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	500µA @ 150V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	D2PAK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CDBD10150-G Rectifier Arrays Application Field and Working Principles

Rectifier diodes are a form of diode that permits current flow in one direction only and typically used for AC to DC conversion. The CDBD10150-G rectifier arrays are ambit of cross-coupled rectifier diodes arranged in pairs - two sets facing each other with a common center: an anode and cathode on either side. This type of array of rectifier diodes serves several benefits including input polarity protection, direct interfacing with AC and DC power supplies, and isolated gate drive. There are many application fields where the CDBD10150-G rectifier array can be useful:

AC/DC Power Supplies

AC/DC power supplies are often used in electronic devices and systems to supply a stable DC voltage from a variety of AC input sources. The CDBD10150-G rectifier array can be used to develop AC to DC output by rectifying the alternating current waveform into a steady DC voltage. This can be achieved by using one of the diodes in the CDBD10150-G rectifier array to convert each half of the AC waveform into a corresponding DC voltage. The advantage of using a rectifier array is that two diodes are used in parallel to increase the total rectifier current handling capability of the system. The use of the CDBD10150-G rectifier array also ensures that the AC voltage waveform and the DC voltage produced are in phase with each other.

Direct Interfacing with AC and DC Power Sources

When designing power supplies, direct interfacing with the power source is important for efficient operation. The CDBD10150-G rectifier array offers an ideal solution for this by providing isolated and bidirectional power paths between each fuse or relay in the power source and the load. The use of the rectifier array can also allow for better power control by providing a high-side and low-side power switch that can be easily triggered when needed. This ensures that the power from the source is supplied directly to the load with minimal voltage drop or loss.

Automatic Voltage Regulation

The CDBD10150-G rectifier array can also be used to develop an automatic voltage regulation (AVR) system. The use of two sets of cross-coupled rectifier diodes allows the current output of the system to remain steady and in phase with the voltage output. This helps to prevent power spikes and reduce power consumption levels. Additionally, the diode pairs make it easy to implement pulse-width modulation (PWM) techniques to control the output voltage of the power source. This allows the system to regulate the current and voltage outputs as needed to ensure optimal operation.

Isolated Gate Drive Systems

The use of the CDBD10150-G rectifier array also allows for the development of isolated gate drive systems. These systems make use of the diodes to provide a protective barrier between the gate circuit and the main power source. This prevents the gate circuit from being over-currented, thus avoiding any potential damage.

Conclusion

The CDBD10150-G rectifier array is an effective device for AC-to-DC conversion and direct interfacing with AC and DC power sources. Its cross-coupled design also makes it ideal for developing isolated gate drive systems and AVR systems. Due to its low cost and high efficiency, the CDBD10150-G rectifier array is a popular choice for use in many electronic devices and systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description