CDLL4617

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of semiconductor that are used essentially as a one-way valve. They allow current to flow through them in a single direction while preventing it from flowing in the opposite direction. Zener diodes are a particular type which is specifically designed to allow current to flow in the reverse direction when a specified voltage is reached. The CDLL4617 is a Zener diode that is designed for use in various applications.

The CDLL4617 uses Silicon as the semiconductor material and it has a maximum off-state voltage of 45 volts and a maximum reverse leakage current of 1 μA. The breakdown voltage of the diode is 4.6 volts and it has a power dissipation of 500 mW. It is designed for use in various circuit applications where a low breakdown voltage is required. The CDLL4617 can be used in voltage regulator circuits and voltage clamp circuits where it will protect devices from damage due to high voltage spikes. It can also be used in Zeners where the breakdown voltage is used to limit the maximum voltage to a predetermined value.

The CDLL4617 operates on the principle of avalanche breakdown. Avalanche breakdown occurs when a region of high electric field is created in the reverse biased device resulting in the few initial electrons in the region attaining enough energy to ionize additional carriers due to collisions. This causes a rapid increase in the minority carrier density which results in a large current flow and a rapid increase in voltage in the reverse direction. The CDLL4617 is designed to take advantage of this principle.

The junction of the CDLL4617 is designed specifically to create an electric field of a greater magnitude than normal when the applied reverse voltage is greater than the breakdown voltage. This causes the avalanche breakdown and the impact ionization mechanism of the CDLL4617 to occur which creates a large current flow and changes the voltage across the junction. The breakdown voltage of the CDLL4617 is 4.6 volts which allows it to be used in various applications where a low breakdown voltage is desired.

In addition to its use as a voltage regulator, the CDLL4617 can also be used as a voltage clamp. A voltage clamp circuit is used to protect sensitive electronic components from damage due to a high voltage spike. The CDLL4617 is able to ensure that the voltage never exceeds the specified level so that it never rises to the point where it could damage the device.

The CDLL4617 is also used in Zener circuits. A Zener circuit is one where the breakdown voltage of the diode is used to limit the output voltage to a predetermined value. The CDLL4617 is able to ensure that the voltage never exceeds the breakdown voltage so that the output is always limited to the specified value.

In conclusion, the CDLL4617 is a Zener diode that is designed for use in various applications where a low breakdown voltage is desired. Its breakdown voltage of 4.6 volts makes it well suited for use as a voltage regulator, voltage clamp, and Zener circuit.

The specific data is subject to PDF, and the above content is for reference