CNY117-3X016

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic components that electrically isolate two circuits. As part of a larger system, optoisolators can prevent unexpected device interaction. As well as providing feedback or control signals, optoisolators can enable control over dangerous systems by monitoring and responding to system conditions. One type of optoisolator is the CNY117-3X016, a optoisolator with a transistor photovoltaic output.

The CNY117-3X016 is a single channel optoisolator that provides excellent CTR performance over a wide range of ambient temperatures and illumination sources. This device features an integrated light source that is triggered by an input voltage, allowing a low voltage drive circuit for controlling a high voltage load. The device offers rising and trailing edge triggering, allowing control over devices that require either type of input.

The CNY117-3X016 optoisolator consists of a photo-transistor, two reverse biased diodes, and an LED that serve to provide the necessary isolation between the two components. The photo-transistor amplifies the LED current when illuminated and conducts current to the other side when it is sufficiently illuminated. The two reverse biased diodes protect the transistor from voltage spikes and are necessary for proper device operation.

The CNY117-3X016 optoisolator is used in applications where electrically isolated feedback or control is required. Automotive systems such as engine computers may use the device to control an engine component, like an idle speed control valve. Another application is the control of laboratory equipment, such as an automated process controller. The CNY117-3X016 is also suited for use with non-isolated power in industrial equipment, providing a method of monitoring and control even when line isolation is impractical.

The typical working principle of the CNY117-3X016 optoisolator is based on the forward biasing of the integrated LED light source. When the input voltage is applied to the LED, it emits light which is then amplified by the photo-transistor within the device. This creates a current flow between the two isolated components, thus providing electrical isolation between the two. The current flow is then controlled by the resistance presented by the load, as any changes in load resistance will affect the current output of the device.

The CNY117-3X016 optoisolator is designed for a wide range of applications due to its high performance and compact design. With its excellent isolation capabilities and low voltage drive requirements, the device is well suited to control, feedback, or signal applications in systems that require electrical isolation.

The specific data is subject to PDF, and the above content is for reference