CNY17-2X001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are components used to allow for electrical isolation between two sections of an electrical circuit. This isolation helps protect the delicate circuitry from current spikes and other electrical disturbances that could disrupt the operation of the circuit. In particular, optoisolator components are used in sensitive instrumentation and controller circuits in industries such as medical technology and lighting. The particular type of optoisolator considered in this article is the CNY17-2X001 Transistor Photovoltaic Output Optoisolator.

The CNY17-2X001 is a 4-pin optoisolator featuring a gallium arsenide infrared emitting diode (IRED) as its input, and a phototransistor as its output. An infrared light emitting diode (LED) is used to transmit a signal to the phototransistor. The phototransistor receives the infrared signal, which it then uses to power the attached circuit. In the CNY17-2X001, the input voltage range is 5V to 12V and the output current is 40mA.

The application field for the CNY17-2X001 is broad. It can be used to electrically isolate digital logic circuits, sensors, amplifiers, and other components. It is particularly useful in applications that require high levels of noise immunity. The CNY17-2X001 is also capable of providing very fast switching speeds, which make it ideal for controlling motors or other devices that require fast response times.

The main advantages of the CNY17-2X001 are its high voltage, fast switching speed, and high noise immunity. The device also offers excellent protection against electric shocks and short circuits. Because the device does not require any direct contact between the pins, there is a reduced risk of electric sparks that can cause damage to delicate components.

The working principles of the CNY17-2X001 are based on the principles of electromagnetic induction. When the input signal is applied to the IRED, the generated current in the IRED causes the phototransistor to emit light. This light consists of infrared radiation with wavelengths between 830 and 840nm. When the infrared radiation hits the phototransistor, it alters the current flow in the phototransistor, which in turn generates a voltage. This voltage is then sent out through the output connection.

The CNY17-2X001 is a useful component for a variety of electrical applications ranging from industrial control systems to medical monitoring systems. Its ability to provide high levels of noise immunity, fast switching speeds, and excellent protection against electric shocks make it an attractive choice for many different applications. Furthermore, the working principles of electromagnetic induction that are used in the CNY17-2X001 are reliable and efficient.

The specific data is subject to PDF, and the above content is for reference