CNY117-4X001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that are used to provide electrical isolation between two circuits. They are an important component in many industrial, medical, and consumer applications. The CNY117-4X001 optoisolator is a transistor, photovoltaic output device that provides high electrical isolation, up to 3750Vrms for one minute. This optoisolator is typically used in applications such as digital protection, active surge suppression, line interruption, switch mode power supplies, motor control, and industrial automation. The device can also be used in any application that requires isolation to protect the load circuit from the drive circuit.

The CNY117-4X001 optoisolator is composed of two sections: an input coupler and an output coupler. The input coupler consists of an infrared light-emitting diode (LED) and a glass package to protect the LED from electrical and environmental disturbances. The output coupler consists of a phototransistor housed in a black plastic package. The device works by converting an electrical signal into a light signal with the LED in the input section, and then converting the light signal back into an electrical signal with the phototransistor in the output section. An optoisolator does not pass any current between the two sections, so it can draw very low power from the input circuit and provide excellent isolation between the two sections.

The CNY117-4X001 optoisolator has a nominal LED forward voltage of 1.5V, with a typical operating forward current of 10mA. Its output is a photo transistor that has a low output saturation voltage and high isolation. The maximum collector-emitter voltage is 90V, the maximum collector current is 60mA, and the maximum allowed power dissipation is 150mW. The device is rated for a maximum safe storage temperature of 150°C and a minimum operating temperature of –40°C.

The CNY117-4X001 optoisolator is capable of switching speeds of up to 8MHz and is designed to provide excellent isolation between the input and output sections. The device is RoHS compliant and is supplied in a standard 4-pin package with gold-plated lead frames for reliable connections. It is an invaluable tool for applications requiring reliable and stable high voltage isolation.

The specific data is subject to PDF, and the above content is for reference