CNY17F-3X019T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that are used to provide electrical isolation between the control and operational circuits in a system. They are typically constructed using an optically coupled LED or photodiode and an electrical component, such as a transistor. The CNY17F-3X019T is a type of optoisolator that provides optically isolated output in the form of an NPN transistor, photovoltaic type.

The CNY17F-3X019T is a surface-mount package that contains a phototransistor in series with an optocoupler and a photo-voltaic cell in a four-tower design. The device consists of a photo-diode and a bipolar transistor, which is connected in series and is driven by the output from the photodiode. The transistor is connected to the control circuitry through an output pin. The photodiode is connected to a power supply, while the photovoltaic cell, located on the bottom, provides the drive current for the phototransistor. This device is available in two different packages, a 20-pin DIP and a 4-lead SOT-93.

The working principle of the CNY17F-3X019T optoisolator is based on the phenomenon of photon emission. When an electrical signal is applied to the input of the device, the photodiode generates photons that are then guided to the photovoltaic cell, which absorbs the photons and produces an interelectric that results in the voltage drop across the transistor base-emitter terminals. This causes the transistor to switch on and its collector voltage to drop. The collector current is then provided to the control circuitry through an output pin.

The CNY17F-3X019T optoisolator is typically used for applications where reliable electrical isolation between two circuits is required. This is especially important in systems where a high-voltage circuit and a low-voltage circuit need to be electrically isolated. It can also be used to prevent current from one circuit from flowing to another circuit. This device is especially useful for communication technologies, such as digital or logic systems, that require electrical isolation between the control and the power circuits.

In summary, the CNY17F-3X019T is an optoisolator that provides a transistor, photovoltaic output, and is available in two different packages – a 20-pin DIP and a 4-lead SOT-93. It works on the principle of photon emission and is typically used for applications where reliable electrical isolation is required. This device is particularly useful for communication technologies, such as digital or logic systems, that require electrical isolation between the control and power circuits.

The specific data is subject to PDF, and the above content is for reference