CNY117F-1X007T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are an important component in many circuits, transmitting electrical signals through light emitting elements, while providing electrical isolation between the circuit and the source of the signals. The CNY117F-1X007T is one such optoisolator, providing photovoltaic isolation between input and output stages with transistor output.

The CNY117F-1X007T is made up of a light emitting diode (LED) and a phototransistor, so that the LED will serve as an input, and the phototransistor will switch on and off depending on the input. In operation, the LED will emit a signal when its input voltage reaches a certain threshold, be it current or voltage. The phototransistor will then sense the output of the LED, and will switch on and off depending on the input.

This provides a level of electrical isolation between the input and output stages, as there is no direct electrical connection between them. This makes the optoisolator ideal for applications where users require electrical isolation of the signals, however, due to the higher voltage requirements to enable the LED signal to be switched on and off, it’s not typically used for low-voltage applications.

In terms of applications, the CNY117F-1X007T can be used in many control systems, where isolation is required between the logic level and the output devices. This includes automotive systems, computer systems and more. Furthermore, its fast response time makes it well suited for use in frequency control systems, such as motor speed/torque control systems and pulse width/duty cycle applications.

In terms of operation, the CNY117F-1X007T is standard transistor output, which means that the output device will be either on or off. This means that it is often used to switch a load on and off, as opposed to providing an analog output. As the transistor is switched on and off very quickly, this results in a pulsed output, which is often used in motor speed control systems.

The CNY117F-1X007T optoisolator provides a cost-effective solution for those in need of an electrical isolation between the two circuits. Furthermore, its fast response time makes it suitable for pulse width and duty cycle applications, as well as frequency control systems. As a transistor output device, it is often used to provide an on/off switching output, rather than an analog signal.

The specific data is subject to PDF, and the above content is for reference