CNY117-2X007T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Voltage - Isolation:	5000Vrms
Current Transfer Ratio (Min):	63% @ 10mA
Current Transfer Ratio (Max):	125% @ 10mA
Turn On / Turn Off Time (Typ):	3µs, 2.3µs
Rise / Fall Time (Typ):	2µs, 2µs
Input Type:	DC
Output Type:	Transistor with Base
Voltage - Output (Max):	70V
Current - Output / Channel:	50mA
Voltage - Forward (Vf) (Typ):	1.39V
Current - DC Forward (If) (Max):	60mA
Vce Saturation (Max):	400mV
Operating Temperature:	-55°C ~ 110°C
Mounting Type:	Surface Mount
Package / Case:	6-SMD, Gull Wing
Supplier Device Package:	6-SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output Optoisolators are devices used to isolate and couple electrical signals between two circuits by using light-sensitive components. One of the most popular optoisolators is the CNY117-2X007T. This device features a photovoltaic output transistor, which is capable of providing a high degree of electrical isolation between input and output.The CNY117-2X007T optoisolator is typically used in applications where there is a need to switch DC or AC power, or where a signal needs to be transmitted through an electrically noisy environment. The optoisolator isolates signals in a wide range of frequencies, including AC and DC signals. One of the major advantages of using this optoisolator is that it is capable of providing a high degree of electrical isolation between input and output, allowing the device to be used in applications with higher electrical noise levels.The CNY117-2X007T optoisolator contains an infrared LED, a photovoltaic output transistor, and a reverse-biased Auxiliary Emitter Diode (AED). The LED emits light from its terminals, which is then detected and converted to current by the photovoltaic output transistor. This transistor is capable of providing a high degree of electrical isolation between the input and output circuits. The AED acts as a “safety” device to keep the LED from being overdriven. It is connected in reverse bias to the LED and its current output limits the current flowing through the LED.The CNY117-2X007T optoisolator can be used in a variety of applications, including motor control, DC–AC switching, industrial controls, opto-isolators, AC motor protection, and light switches. The optoisolator is capable of providing electrical isolation up to 1000Vrms and has a operating temperature range of –55°C to +125°C. The device has a maximum operating current range of 5mA to 50mA, and its output current gain can reach up to 200mA.In summary, the CNY117-2X007T optoisolator is an effective way to isolate and couple electrical signals between two circuits. Its photovoltaic output transistor is capable of providing a high degree of electrical isolation between input and output, and it is designed to operate in a wide range of frequencies, including AC and DC signals. The device is also highly reliable, with an operating temperature range of –55°C to +125°C and an output current gain of up to 200mA. The optoisolator has a wide range of applications, making it a versatile device for countless applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description