CNY1743S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are used to isolate input and output circuits in the control of electrical devices. They may be used to drive a battery charger, a motor, a fan, a heating element, or even a DC-to-AC voltage converter. The CNY1743S is a type of optoisolator, belonging to the Transistor-Photovoltaic Output type.

The CNY1743S is a fast, wide-angle optoisolator designed for switching and modulating applications. Its isolation is provided by a LED and transistor combination, and has a maximum isolation voltage of 5200V. It is designed to switch DC and AC applications, in laboratory, industrial, and computer control applications.

The CNY1743S optoisolator is a 6-pin device featuring two positive terminal pins, "anode" and "emitter"; two negative terminal pins, "cathode" and "collector"; and two signal terminal pins, "control" and "signal". The anode is connected to the positive supply voltage and the emitter is connected to the load. The cathode is connected to the negative supply voltage and the collector is connected to the microcontroller. The control pin is used to supply the LED voltage, and the signal pin is used to detect the output of the LED.

The CNY1743S optoisolator works by supplying current to the LED, which in turn emits light via a photocurrent. The light, generated by the LED, is detected by a photosensor. The photodiode current is then amplified by the transistor, producing a larger current output which is available at the signal pin. The circuit is very sensitive to light, and the output current is proportional to the input current. The output current is then used to control the load.

The CNY1743S optoisolator is used mainly in DC and AC applications. In DC applications, it can be used to isolate input and output circuits. For example, it can be used to switch a DC motor, by supplying a voltage to the LED and sensing the output of the optoisolator. The output current from the optoisolator then acts as a digital signal for controlling the motor. In AC applications, the CNY1743S optoisolator can be used to switch and modulate. It can be used to switch an AC voltage in laboratory, industrial, and computer control applications. It can also be used to modulate an AC voltage, using the output current to control the AC output.

The CNY1743S optoisolator is designed for switching and modulation applications. It can be used to remotely control electrical devices, providing isolation to input and output circuits. It is a fast, wide-angle optoisolator featuring a maximum isolation voltage of 5200V. It is mainly used in DC and AC applications, for switching and modulation.

The specific data is subject to PDF, and the above content is for reference