CNY17F-1S1(TB)-V

Output Type:	Transistor
Supplier Device Package:	6-SMD
Package / Case:	6-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 110°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.65V (Max)
Current - Output / Channel:	--
Voltage - Output (Max):	80V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	6µs, 8µs
Turn On / Turn Off Time (Typ):	10µs, 9µs
Current Transfer Ratio (Max):	80% @ 10mA
Current Transfer Ratio (Min):	40% @ 10mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that are designed to provide electrical isolation between two parts of a circuit, such as between two pieces of equipment or between a sensor and a controller. The CNY17F-1S1(TB)-V is a particular type of optoisolator, classified as a transistor output, photovoltaic device, which combines an optical isolator and an amplifier, outputting the input signal through a light source, a semitransparent optical window, a photo amplifier, a phototransistor, and a photo resistor.The device operates in two modes, depending on the applied illumination level. In the dark mode operation, an illumination level of up to 3 lux or lower is required; in the bright mode operation, a level of 3 lux or greater is needed. When the device is in its dark mode, it will remain in the off state regardless of the input signal, while when in the bright mode, the device will change its output state to reflect the state of the input signal.The CNY17F-1S1(TB)-V optoisolator is typically used in industrial applications to ensure an electrical separation between two circuits, in applications such as a proximity switch or a safety relay. This optoisolator will detect the presence or absence of an object and output a corresponding signal based on the reflected light from the object. This type of optoisolator is also used in security systems where it is important to protect circuits from electrical surges.The CNY17F-1S1(TB)-V optoisolator works by utilizing an optical output, thus creating an electrical separation between two circuits; the device will allow signals to pass between two circuits without risking damage to either circuit. This is accomplished by using a diode as a light source, a semitransparent optical window, a photodiode, a phototransistor, and a photoresistor.When the diode is current and the semitransparent window is illuminated, the photodetector will detect the light and generate an electrical signal. This electrical signal will be transferred to the phototransistor and the photoresistor, amplifying the signal and outputting it to the desired interface.The CNY17F-1S1(TB)-V optoisolator is used in many industrial applications, from safety devices to industrial controls, to ensure that electrical signals are properly isolated and that components remain undamaged from surges of electricity. By providing this type of electrical isolation, devices such as safety relays can be used with confidence, ensuring the optimal performance of industrial device and systems. Additionally, the optoisolator can be used for protective applications, increasing the safety of vulnerable circuits and components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description