CNY17F-1X007

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic devices used to provide electrical isolation between two circuits or systems. An optoisolator typically consists of an LED or infrared emitter connected with a light-sensitive silicon phototransistor within a common package. This type of optoisolator is called a transistor-photovoltaic (TPV) optoisolator. CNY17F-1X007, by contrast, is an isolated AC/DC converter module consisting of an opto-isolator, a resistor, a rectifier, and some connecting wires. It offers galvanic isolation of up to 3000 Volts and converts an input voltage of up to 24 VDC to an isolated DC output voltage of 5 V.

CNY17F-1X007 is an opto-isolator designed for industrial, automotive, and telecom applications. It provides 5000Vrms of electrical isolation between input and output circuits and delivers a high current of 1A. The product is based on a opto-isolator with an LED and a phototransistor inside a common package, isolated from each other by an air gap. The input voltage of the isolator is typically connected to an external power supply, and the output voltage is delivered by a phototransistor that is directly optically coupled to the LED.

The working principle of CNY17F-1X007 is simple. When an electrical signal is input to the isolator, the LED lights up. While the LED is emitting light, it is also releasing a signal to the phototransistor which is situated in a separate, isolated package. This phototransistor essentially serves as an amplifier, and amplifies the signal coming from the LED. This amplified signal is then output to the isolate to power the output circuit. Additionally, an internal resistor is utilized within the opto-isolator to limit the current flowing through the LED and phototransistor.

CNY17F-1X007 can be applied to a variety of industrial, automotive, and telecom applications. One example is within an industrial application for powering a motor. In this case, the module can be used to provide a galvanic separation between the power source and motor, increasing safety and reliability. In a telecom application, CNY17F-1X007 can be used to isolate communication signals, reducing the risk of interference, noise, and potential data corruption from other incoming signals. Finally, in automotive applications, the opto-isolator can be used to provide an interface between sensors and control units, ensuring that the signals remain isolated from one another.

CNY17F-1X007 is a transistor-photovoltaic output optoisolator designed for industrial, automotive, and telecom applications. It offers 5000Vrms of electrical isolation between input and output circuits and delivers a high current of 1A. The opto-isolator works by utilizing an LED and phototransistor within a common package to amplify signals, and an internal resistor to control the current. It can be applied to a variety of industrial, automotive, and telecom applications, including motor power, signal isolation in telecommunications, and interface applications for sensors and control units.

The specific data is subject to PDF, and the above content is for reference