CNY17F-3M-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of solid-state component specifically designed to provide electrical insulation between two circuits while simultaneously allowing analog or digital logic signals to be transferred between the two. The CNY17F-3M-V optoisolator belongs to the transistor, photovoltaic output type and is most commonly used for applications such as analog signal conversion, power supply protection, digital input interface conversion, or signal isolation. The CNY17F-3M-V optoisolator is a three-pin device featuring a photodiode, infrared light-emitting diode, and an output transistor.

The CNY17F-3M-V optoisolator works by taking advantage of the fact that the outputs of the LED and photodiode are electrically isolated from each other, allowing for simple current to voltage conversion. To use one of these optoisolators, a signal source (e.g. a microcontroller) is connected to the infrared LED anode. As the LED emits an infrared light, the light is detected by the photodiode which converts the light into a current. The current then passes through a resistor, and the resulting voltage is coupled to the base of the output transistor. The transistor’s collector and emitter pins can then be connected to the user’s circuit for output.

The applications for the CNY17F-3M-V optoisolator are varied. Its small size and high electrical insulation allow for use in cases that require the input and output signals to be isolated. For example, it can be used in analog signal conversion, allowing input signals that are not compatible with a microcontroller to be converted to a logic level that can be used by the microcontroller. It is also commonly used as a power supply protector, as it can block large transients from interfering with the power supply. Additionally, the optoisolator can be used to provide isolation between digital inputs and an output signal. In this case, the input signal is connected to the LED, and the output signal is taken from the transistor. When the LED is active, current will flow through the transistor and the output will be active.

Overall, the CNY17F-3M-V optoisolator is a small, reliable component that is ideal for providing electrical isolation between input and output signals while allowing the transfer of analog or digital logic signals. Its most common applications include analog signal conversion, power supply protection, and digital input interface conversion.

The specific data is subject to PDF, and the above content is for reference