CNY17F2SM

Output Type:	Transistor
Supplier Device Package:	6-SMD
Package / Case:	6-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.35V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	4µs, 3.5µs (Max)
Turn On / Turn Off Time (Typ):	2µs, 3µs
Current Transfer Ratio (Max):	125% @ 10mA
Current Transfer Ratio (Min):	63% @ 10mA
Voltage - Isolation:	4170Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

The CNY17F2SM optoisolator is a four-pin, through-hole component used to isolate low-voltage signals from higher voltage components or circuits, such as between two separate microcontroller circuits, between two separate digital logic devices, or between a digital logic device and a microcontroller. A typical application is when a low-voltage circuit needs to be isolated from a high-voltage circuit, or when two separate circuits need to be tested for isolation. When used in this manner, the optoisolator allows one circuit to detect and respond to electrical signals that are generated within or across another circuit in the system.The CNY17F2SM optoisolator consists of two parts: a light emitting diode (LED) and a photodiode (PD). When an input signal is applied to the LED, it produces a low current output at the photodiode, resulting in a voltage drop across the optoisolator. By detecting this voltage drop, the optoisolator is able to detect and respond to input signals. The working voltage range of the CNY17F2SM optoisolator is 1.65V-24V.The primary advantage of an optoisolator is that it allows strong electrical isolation between two circuits, protecting each one from noise, ground loops, and other disturbances. This means that signals in one circuit can be detected without the signal being affected by noise or other disturbances of the other circuitry.The CNY17F2SM optoisolator also provides an improved response time compared to other optoisolators. The response time of the CNY17F2SM is typically only 10 nanoseconds. The low latency response also helps lower the EMI emissions, allowing the device to be used in noise-critical applications such as automotive or medical.The CNY17F2SM optoisolator offers a number of other benefits, including low power consumption, low heat dissipation and a wide input and output range. It has a low power consumption of 0.7 mW and a low heat dissipation of 4 mW, making it suitable for power-constrained applications. The wide input and output range makes it suitable for a variety of applications, as it can be used to provide electrical isolation between circuits with voltages ranging from 1.65V to 24V.In summary, the CNY17F2SM optoisolator provides a strong electrical isolation between two circuits while also offering a low power consumption, low dissipation, and a wide input and output range. The low latency response and low EMI emissions make it suitable for noise-critical applications such as automotive or medical, and makes it an ideal choice for applications where strong electrical isolation is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description