CNY17F3300W

Output Type:	Transistor
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	100mA
Voltage - Forward (Vf) (Typ):	1.35V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	1µs, 2µs
Turn On / Turn Off Time (Typ):	2µs, 3µs
Current Transfer Ratio (Max):	200% @ 10mA
Current Transfer Ratio (Min):	100% @ 10mA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

Optoisolators are devices that are designed to provide reliable electrical isolation between two parts of the same circuit. A popular type is the CNY17F3300W. This device works using an LED and an output transistor that are optically decoupled from one another, meaning that there is minimal electrical connection if any, between the two.The CNY17F3300W consists of a phototransistor optically coupled to a light-emitting diode. The LED emits light onto the phototransistor, which then amplifies the light signal and converts it into an output voltage that can be used in an application.When the CNY17F3300W is used as an opto-isolator, the electrical properties of the device work as follows:When the input is an Alternating Current (AC) waveform, the LED will turn on and off in sync with the waveform. This causes the output from the phototransistor to also be an AC waveform, thus providing a complete electrical isolation between the input and the output.When the input is a Direct Current (DC) waveform, the output of the device will be impedance-matched, allowing the DC currents to flow freely without the need for isolation. This proves to be beneficial in applications where input and output circuits must behave identically.In regards to application fields, the CNY17F3300W can be used in a variety of applications including:• Industrial Control Systems – including relays and contactors to switch larger DC currents.• Automotive applications – Used to detect light from a defective bulb or indicator light.• Robotics – Used to sense the action of a switch or button that controls the movement of a robot arm.• Communications – Allows light signals to be transmitted over long distances without the need for wires.• Industrial Automation – Used to detect the presence of objects and containers through a change in the light intensity of the LEDs.In conclusion, the optoisolator device CNY17F3300W is a cost effective, reliable and versatile tool for electrical isolation applications. Its ability to match impedance and sense light pulses offers a wide range of handy possibilities in both commercial and industrial projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description