CY74FCT257TQCT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal switches, multiplexers, decoders and other such digital logic devices are devices that interpret their input signals and impose a certain output based upon the inputs. The CY74FCT257TQCT is one such device. It is a high-speed, low-power CMOS device that functions as a quad 2-to-1 multiplexer (4x1 Mux). It has been designed for high-performance applications requiring fast switching times, low-power dissipation, and low signal loading.

In a quad 2-to-1 multiplexer, four independent channels are input into the mux, and depending on the address/control signals on the select lines, the output signal will be set to either of the input channels. This can be accomplished with four 2-input NAND gates to form 2 sets of NAND gates that can be enabled. The output of each of these sets of NAND gates would then be input into a single OR gate to create the multiplexer.

The CY74FCT257TQCT is a multiplexer that is optimized for use in bus-oriented systems. It features two logic select inputs, SEL0 and SEL1, that can be easily connected to form an 8-bit address bus. The device also has a separate enable (EN) input in order to enable the output. The device can be used in either active low or active high enable configurations.

The CY74FCT257TQCT can be used in a wide range of applications that require switching of multiple signals. It is commonly used in applications such as bus arbitration, bus transceivers, bus multiplexing, data multiplexing/demultiplexing, memory interfacing, and processor interfacing.

In terms of operation, the CY74FCT257TQCT’s select inputs SEL0 and SEL1 allow the user to select which of the four data inputs DI0-DI3 will be routed to the output. This is done by setting the select lines to either a low or high level depending on the input chosen. When the ENA input is high and both of the select inputs are high or low (depending on the enable configuration set), all signals will be routed to the output. When either of the select inputs are set differently than the ENA input, the chosen input will be routed to the output.

The CY74FCT257TQCT has been designed to operate under supply voltages of 3.3V to 5.5V. It has a power dissipation of 4 mW and features a maximum propagation delay of 4.3 ns. This makes it suitable for use in high-speed, low-power applications.

In conclusion, the CY74FCT257TQCT is a quad 2-to-1 multiplexer with low-power and fast switching times, making it an ideal choice for bus-oriented systems. It is capable of operating under different power supply voltages and is suitable for applications that require switching of multiple signals.

The specific data is subject to PDF, and the above content is for reference