DC1796A-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC1796A-H is an evaluation system designed by Linear Technology. It is designed to bridge the gap between the Voltage-to-Frequency-Converters (VFCs)/Analog-to-Digital-Converters (ADCs) and high voltage medium voltage (HV/MV) power supplies. This board is a versatile and almost universal device that does the job of both a voltage-to-frequency-converter (VFC) and an analog-to-digital-converter (ADC).

The board provides full-duplex communication, which allows two-way communication between the host processor and a monitoring and control system. This board utilizes the following layout: two-channel digital input/output ports, two-channel analog input/output ports, flash memory, and a USB port. It also comes with a Linear Technology LT1963 Voltage-to-Frequency-Converter (VFC) and a Linear Technology AD7639 24-bit Analog-to-Digital-Converter (ADC). Therefore, DC1796A-H can integrate both AC and DC signals and convert them into digital signals. Additionally, it is capable of connecting to either a 12V-15V power source or a directly powered by the USB port.

The DC1796A-H Evaluation System features several functions that make it the ideal tool for many applications. The two digital ports are used to connect the board to PLCs, drivers, and communication buses to enable two-way communication. Furthermore, the two analog ports can be connected to power electronics devices such as AC or DC current sensors, to allow the board to monitor and control their operation. Finally, the integrated LT1963 Voltage-to-Frequency-Converter (VFC) and the AD7639 24-bit Analog-to-Digital-Converter (ADC) enable the evaluation system to perform analog-to-digital conversions.

The working principle of the DC1796A-H is relatively straightforward. When a signal is received, the digital input/output ports relay the data to the host processor through the USB port. This data is then processed by the processor and sent to the output device for further processing. The Analog-to-Digital-Converter (ADC) is then used to convert the analogue signals into a digital format, allowing for the accurate conversion and transmission of the signal.

DC1796A-H can be used in many fields, such as the factory automation, robotics, and renewable energy sectors. In factory automation, the board can be used to monitor power flows, control motors, and assist with fault diagnostics. In robotics, the board can be used to bridge the gap between sensing and control units to enable complex robots to accurately respond to their environment. Finally, in the renewable energy sector, the board can be used to interface with solar and wind power systems to monitor and control their operation.

In conclusion, the DC1796A-H Evaluation System is a robust and versatile device that can perform both Voltage-to-Frequency-Converters (VFCs)/Analog-to-Digital-Converters (ADCs) functions and provide communication between a host processor and monitoring/control systems. It is also capable of connecting to either a 12V-15V power source or a USB port for direct powering. Furthermore, it can be used in a wide range of fields to facilitate a variety of applications, from robotics to renewable energy systems.

The specific data is subject to PDF, and the above content is for reference