DDTA115TCA-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DDTA115TCA-7 is a silicon NPN transistor, which belongs to the category of transistors, known as bipolar junction transistor or BJT. It is a single transistor and its two components, collector and emitter, are pre-biased typically with 7 volts. The transistor is commonly used in low-power, low-voltage applications. The DDTA115TCA-7 is available in a variety of forms and sizes, so it is ideal for use in a number of situations.The function of this type of transistor is to amplify electrical signals or current. It is a 3-terminal device, in which the electrical signal is fed into the base terminal and the amplified versions of this signal is obtained from the collector and emitter terminals. The gain produced in the transistor depends on the relative number of electrons that move from the base to the collector and from the base to the emitter. The DDTA115TCA-7 has an average DC current gain of 250 and a DC voltage gain of 50. It has a maximum voltage rating of 125V, with a power dissipation of 1.2 Watts. It also has a switching speed of 1μs, which allows it to be used in high frequency applications. The transistor has a maximum collector current of 800mA and a maximum base current of 10mA. Given its low voltage and power requirement, the DDTA115TCA-7 is commonly used in low-power applications such as telephone amplifiers, audio amplifiers, logic switching, and switch-mode power supplies. It is also used in automotive audio amplifiers and low power audio amplifiers.The working principle of the DDTA115TCA-7 is the same as that of other transistors. The base terminal is used to control the current flow between the collector and emitter terminals, in order to amplify the input signal. The amount of current that flows from the collector to the emitter is determined by the amount of current that is flowing into the base. If more current flows into the base, more electrons will flow from the collector to the emitter and the output current will be increased. Likewise, if there is less current flowing into the base, less current will flow from the collector to the emitter, resulting in a decreased output current. The current gain of the DDTA115TCA-7 is determined by the ratio of the collector current to the base current. As mentioned earlier, the average current gain of the DDTA115TCA-7 is 250, which means that for every 1mA of current flowing into the base, 250mA will flow from the collector to the emitter.In conclusion, the DDTA115TCA-7 is a silicon NPN transistor and belongs to BJT category of transistors. It is a single transistor and pre-biased typically with 7 volts. The DDTA115TCA-7 has an average DC current gain of 250 and a DC voltage gain of 50. It has a maximum voltage rating of 125V, with a power dissipation of 1.2 Watts. The DDTA115TCA-7 is commonly used in low-power applications, such as telephone amplifiers, audio amplifiers, logic switching, and switch-mode power supplies. The working principle of the DDTA115TCA-7 is the same as that of other transistors and its current gain is determined by the ratio of the collector current to the base current.

The specific data is subject to PDF, and the above content is for reference