DG413HSAK-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG413HSAK-E3 is an integrated device designed to switch analog signals. This device is an analog switch, multiplexer and demultiplexer combination with the ability to switch between multiplexing and demultiplexing. It is designed to provide an analog signal on the output for signal routing and conversion purposes. The device is well suited for a variety of applications where signal routing and signal conditioning are required.

The DG413HSAK-E3 is a multi-channel analog switch with a total of 4 channels. Each channel can be individually controlled using three independent logic controls. The channels have a wide range of voltage capability with the ability to switch between 0V to 25V. The total combined current handling capability of the switch is 25mA. The maximum switch-off leakage is 5nA.

The switching speed of the device is also a key feature. The DG413HSAK-E3 has a minimum on-resistance of 0.1Ω and a maximum on-resistance of 0.3Ω. This gives the device the ability to switch signals quickly without any additional capacitor or resistive loads. The switching speed is also determined by the logic level used to control the device. When using an "active low" logic level, the switching speed is around 100ns. The analog switch can also be operated in an "active high" logic level, which decreases the switching speed to 50ns.

The DG413HSAK-E3 is ideal for use in applications where fast switching capabilities and the ability to select between multiple input signals are required. It can be used in a wide range of applications, including audio switching, analog signal routing, signal conditioning and gain selection. Additionally, it can be used in power management applications to route relevant signals when needed.

The working principle of the DG413HSAK-E3 is straightforward. When the logic control lines are driven with the appropriate voltage levels the switch opens up and allows an analog signal to be routed. If the logic levels are reversed then the switch is closed again and no signal can pass through the switch. This means that the device can easily be used to switch between multiple inputs and send the appropriate signal to the output.

The DG413HSAK-E3 is an ideal device for use in applications that require fast switching and the ability to select between multiple sources. The wide voltage range and low on state resistance make this device suitable for a range of applications including audio switching, analog signal routing and signal conditioning.

The specific data is subject to PDF, and the above content is for reference