DG417BDY-T1

Voltage - Supply, Dual (V±):	±15V
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	250pA
Channel Capacitance (CS(off), CD(off)):	12pF, 12pF
Charge Injection:	38pC
-3db Bandwidth:	--
Switch Time (Ton, Toff) (Max):	89ns, 80ns
Series:	--
Voltage - Supply, Single (V+):	12V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	25 Ohm
Number of Circuits:	1
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NC
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DG417BDY-T1 is an interface in Analog Switches, Multiplexers, Demultiplexers category which can be used as a switch, multiplexer and/or demultiplexer of analogue signals. It is an very useful tool for analog signal applications, providing both a high speed low power solution and a flexible interface. This article will discuss the various applications for the DG417BDY-T1 and its working principle.

Application Field

The DG417BDY-T1 can be used in a variety of electronic circuits. It is often used as a low speed control switch, which is important in analogue signal processing, such as when multiple input signals are to be monitored by a single output signal. It is also used in high noise interference environments to provide clean signal switching. It is also used as a multiplexer, which combines multiple input signals into a single output signal. This can be implemented in analogue signal conditioning, signal conversion and image processing applications. Finally, the DG417BDY-T1 can be used as a demultiplexer, allowing multiple input signals to be separated from a single output signal. The DG417BDY-T1 is also a great tool for radio frequency (RF) signal applications due to its low power consumption and wide frequency range. It is used as a switch for high power oscillator generators and phase locked radio signal sources. It can also be used for digital and analog directive antenna signal switching. Finally, it can be used for data transmission between two or more systems, providing a reliable and error free routing.

Working Principle

The DG417BDY-T1 works by using an electromechanical connection to switch, multiplex and/or demultiplex signals. It utilizes an internal switch matrix which is connected to a voltage signal coming in from a control circuit. The switch matrix is then used to direct a signal to the desired output.The DG417BDY-T1 has two main components. The first is a high-speed multiplexer-demultiplexer (MDM) which allows high speed operation. The MDM contains a switching circuit which is used to control the operation of the device. The second component is a low power analog switch, which is used to control the multiplexing and demultiplexing of signals.The mechanism of operation of the DG417BDY-T1 consists of three stages. In the first stage, the analogue signals are multiplexed or demultiplexed using the MDM switch matrix. In the second stage, the multiplexed or demultiplexed analogue signals are routed to the desired outputs via the low power analog switch. In the third stage, the outputs are coupled with the required devices.

Conclusion

The DG417BDY-T1 is a versatile interface which is capable of providing switch, multiplexer, and demultiplexer functionality in a single unit. It is suitable for a variety of applications, including analogue signal processing, high noise interference environments, RF signal processing, and data transmission. Furthermore, its relatively low power consumption and flexible interface make it a great choice for any analogue application. Finally, the DG417BDY-T1 has a simple and intuitive mechanism of operation which is easy to understand and use.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description