DG9232EDQ-T1-GE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG9232EDQ-T1-GE3 Interface - Analog Switches, Multiplexers, Demultiplexers Application Field and Operating Principle

DG9232EDQ-T1-GE3 is a type of Interface-Analog Switches, Multiplexers, Demultiplexers. It is ideal for use in electronic application fields that require high reliability, tight on-off ratios, and low power consumption.

A multiplexer (or MUX) is a logic device which switches digital signal paths. It is used to select one of many input paths and send the signal to the single output. It is sometimes also known as a "data selector".

A demultiplexer (or DEMUX) is the reverse of a multiplexer. It takes one signal with many branches and direct it to one output. It is also known as a data distributor.

An analog switch is an electronically-controlled switch that can be used to selectively direct an analog signal to one or more outputs. It can either be used to replace a mechanical switch, or as an integrated part of a more complex electronic design.

The DG9232EDQ-T1-GE3 is designed for applications such as multiplexers, switch matrices, sample-holds, low-noise switching, TTL/CMOS logic gates, data communications and consumer electronic control. It is a single-pole, double-throw (SPDT), latching switch in a very small (2.5 x 3.5 mm) package.

The DG9232EDQ-T1-GE3 is a low-power, low-noise switch which provides very high off-isolation and fast switching. It can be used to switch RF and digital signals in the 50 MHz to 250 MHz range. It features an impressive on/off ratio of 65 dB (at 150 MHz).

The main advantage of DG9232EDQ-T1-GE3 is its low power consumption. It requires only two voltage supplies (VCC and GND) and a logic control signal. As the control logic is separated from the signal paths, there is no need for additional voltage supplies for the switch itself.

The working principle of DG9232EDQ-T1-GE3is very simple. It has a ‘Change of State’ feature, which allows the switch to be switched between an open circuit and a closed circuit without any extra effort. The switch is driven by a logic signal from an external source. When the control signal is applied, the switch is activated, and an analog signal can be passed through.

DG9232EDQ-T1-GE3 uses a simple ‘on/off’ control logic signal to activate the switch and pass on the analog signal. The switch uses a charge-storage device which keeps the signal in memory and maintains the desired state until the signal is deactivated again.

The charge-storage device helps to reduce the power consumption of the switch and also eliminates any possibility of crosstalk between the switch and the control signal. It is also used to prevent any leakage currents that may be present when the switch is open.

In summary, DG9232EDQ-T1-GE3 is an excellent choice for applications which require low power consumption, high reliability and fast switching. It is ideal for replacing mechanical switches, and for use in multiplexers, switch matrices, sample-holds, low-noise switching, TTL/CMOS logic gates, data communications and consumer electronic control.

The specific data is subject to PDF, and the above content is for reference