DPG20C400PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays in the form of the DPG20C400PC are widely and increasingly used in applications ranging from power conditioning, power conversion and voltage control for alternative energy usage to the more traditional use of rectifiers for generation, conversion and transmission of power in both telecommunications and industrial machines.

The working principle of the DPG20C400PC rectifier array is a straightforward application of the four diode bridge rectifier. The four rectifiers are connected in a symmetrical bridge configuration with two terminals on either side of the circuit. The anode of each diode is connected to one of the two terminals, while the cathode is connected to the other. This configuration is often referred to as a full wave rectifier bridge, because the alternating current entering the system is rectified by two alternating diode-controlled semiconductors as the current flow changes direction and leaves the circuit at a single point of reference through a single terminal.

The output of the bridge-rectifier is a DC voltage. This voltage is regulated by the four diodes forming the bridge. Each of the diodes only allows the current to flow in one direction, thus preventing reverse current. The output of the rectifier is a pulsing DC voltage, and it is necessary to further filter the voltage to eliminate any unwanted low-frequency components in the output pulse.

The DPG20C400PC also features an internal transient avalanche protection diode, which provides additional protection for the rectifier bridge. The avalanche protection diode provides a clamping voltage of approximately 6 volts above the DC current output. In other words, the avalanche protection diode will respond to any excessive transient voltages that exceed the DC output voltage and will quickly reduce the voltage level back to the desired DC voltage level.

The DPG20C400PC rectifier array is commonly used in power conditioning systems, power conversion, voltage control applications, and alternative energy usage. In power conditioning applications, the rectifier array ensures that the output voltage is suitably regulated and filtered against transients and other external interference. In power conversion applications, the rectifier array is used to transform AC power into the desired DC voltage. In voltage control applications, the rectifier array is used to maintain the output voltage level despite changes in the input AC voltage. Finally, in alternative energy usage, the rectifier array is used to extract energy from renewable energy sources such as solar and wind, and convert it into a usable form of energy.

The working principle of the DPG20C400PC rectifier array is fairly simple and is highly effective in its purpose. Its applications in power conditioning, power conversion and voltage control have made the DPG20C400PC rectifier array a popular choice in the alternative energy industry. Its simple design and easy installation allow for cost-effective, long-term use in any application requiring reliable voltage control.

The specific data is subject to PDF, and the above content is for reference