DS1834+

Series:	EconoReset
Packaging:	Tube
Part Status:	Active
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	200 ms Minimum
Voltage - Threshold:	3.3V, 5V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	DS1834

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power supply and power management are important parts of any electronic system. The performance and reliability of a system largely depends on the design of power supply and power management, which can affect the system’s total cost and reliability. A PMIC (Power Management IC) is a device that helps to design a power supply and power management circuit in a system. Among the various PMICs available, the DS1834+ is one of the most popular PMIC. This article aims to explore the application field and working principle of the DS1834+ PMIC. The DS1834+ is a precision CMOS voltage monitor and reset/ watchdog timer. It was designed to detect overvoltage, undervoltage, and power fail conditions. It can also be used to reset the microcontroller in case of a power fail or a system malfunction. The DS1834+ PMIC is mainly used in battery-operated systems or those powered by a power supply that is not very stable. It is also used in system reset circuits and watchdog timer applications. The DS1834+ is designed to detect and respond to voltage changes that may arise from a variety of sources, such as manual switch-off, short-term power loss, long-term power failure, and brownout. When the input signal goes below a certain threshold, an overtemperature warning and an undervoltage warning may also be triggered. Depending on the application and user\'s requirement, the response times of the DS1834+ can be configured.The DS1834+ IC contains two comparators, a voltage reference, a reset and timer logic circuit, and a power-fail detection circuitry. The two comparators can detect both undervoltage and overvoltage, while the reset and timer logic circuit provide reset and watchdog timer functions. The DS1834+ IC also contains a power-fail detection circuitry which can provide an early warning of a power-fail situation before it happens. The DS1834+ inputs and outputs can be interfaced with any microcontroller or logic circuitry. The inputs to the IC can be either three-state logic signals or voltages of up to five volts. The output from the IC can be either a reset signal or a low voltage if a voltage alarm has been triggered. The outputs of the IC can be interfaced with the microcontroller or other logic circuitry and can be used to initiate system reset if required. The DS1834+ PMIC can be used in a variety of applications. It is often used as a reset system in systems that use flash memory and microcontrollers. The IC can also be used in watchdog timer applications, where a reset signal is sent to the microcontroller if it fails to respond to an external stimulation within a given time frame. It is also used to provide overvoltage and undervoltage protection in systems where there is risk of the power supply fluctuating or failing.The DS1834+ is a reliable and low power PMIC that can be used for a variety of applications. It is designed for a wide range of operating voltages of 1.2V to 7.0V, and the device consumes very low power. The DS1834+ PMIC is very easy to use and can be used in a variety of systems where power management is important. It provides reliable protection against power-fail events and also provides reset and watchdog timer functions. This makes the DS1834+ an ideal choice for system reset circuits and watchdog timer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description