DS3695AM/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS3695AM/NOPB is an octal differential bus transceiver families with non-inverting receiver outputs that feature hot swap capability. It has applications in systems where board and chip hot insertion and removal is required. It allows eight differential low voltage transmitter (LVTTL) or low voltage differential signaling (LVDS) inputs to interface with eight complementary outputs of any one of the following: LVTTL, LVDS, or CML compatible. All buses have a common mode voltage range from -2.0V to +2.0V, which allows the parts to be used with either 3.3V or 5.0V power supplies.

This transceiver families is designed for high data rate applications such as those found in the Fibre Channel (FC) and Gigabit Ethernet standards. They can support data rates of up to 2.7 Gbps, making them ideal for use in high speed networking, computer, and storage applications. The parts are qualified according to JEDEC standard 17 and they meet or exceed electrical/optical performance requirements as defined in table 1.

The DS3695AM/NOPB transceivers have several features that make them ideal for use in hot swap applications. The part has an input protected against up to -15kV ESD and it also features an adjustable threshold for input pins for hot plugging. The parts also feature 8-channel fail-safe outputs, adjustable receiver gain, adjustable receiver common mode voltage, and adjustable differential bus swing.

The DS3695AM/NOPB transceivers are capable of working with various interfaces. The parts can be used with SCSI, SATA, Gigabit Ethernet, USB, and PCF interfaces. They can support data rates of up to 2.7 Gbps, making them ideal for applications requiring high speed data transmission.

The DS3695AM/NOPB transceivers are designed to meet the requirements as specified in the international standards. The parts are compliant with ISO/IEC 11801, EN 61000-3-2, EN 60601-1, and TIA/EIA-624. The parts are designed to operate over an operating temperature range of -40°C to +85°C. They feature a power on reset, power down detection, and over-temperature shutdown.

The DS3695AM/NOPB transceivers are designed for use as a stand-alone device or as part of system. The device can be used in full or half duplex applications. The parts feature 8-channel differential transmitter, receiver, and transceivers. The transmitter can support data rates of up to 2.7 Gbps, while the receiver can support up to 1.8 Gbps.

The DS3695AM/NOPB transceivers are designed to minimize power consumption and maximize performance. The parts feature low power consumption (less than 5mW per channel) and fast switching times (16MHz to 2.7Gbps). The parts are designed with a number of power-saving features, such as low voltage sleep mode and wake-up capability.

The DS3695AM/NOPB transceivers are designed for use in hot-swap systems. The parts feature a hot swap protection function, which protects the system from damage caused by power surges and static electricity. The parts also feature 8-channel fail-safe outputs, adjustable receiver gain, adjustable receiver common mode voltage, and adjustable differential bus swing.

Overall, the DS3695AM/NOPB transceiver is an ideal choice for use in hot-swap applications where board and chip hot removal and insertion is required. The part is designed with many features that make it easy to use and flexible to suit a wide range of applications. It is compliant with the various international standards and it is capable of supporting data rates of up to 2.7 Gbps, making it a great choice for high speed networking, computer, storage, and other applications.

The specific data is subject to PDF, and the above content is for reference