E81D500VNN562MR40T

Series:	81D
Part Status:	Active
Lead Free Status / RoHS Status:	--
Ratings:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are one of the most commonly used and inexpensive type of capacitors. They use aluminum construction and an electrolyte, such as sulfuric acid, to store electrical energy. Due to their low cost and low maintenance, these capacitors are favored for use in many electronics applications. The E81D500VNN562MR40T is a specific type of aluminum electrolytic capacitor and it has a wide range of application fields and working principles.The E81D500VNN562MR40T is a medium-sized aluminum electrolytic capacitor. It is rated at 500V (Voltage) and 56,000 uF (microfarads). It has a lead spacing of 2.5mm and a diameter of 8mm. The maximum operating temperature is 105 degrees Celsius. The E81D500VNN562MR40T also has a long life expectancy of up to 2000 hours.The E81D500VNN562MR40T capacitor is mainly used in power supplies, electronic buzzers, and signal filtering/smoothing applications. It is also used in medical diagnostic equipment and temperature controllers. In power supplies, the capacitor helps to store the charge and filter out any unwanted noise or fluctuations. In electronic buzzers, it helps to maintain the right frequency level and creates a loud sound. In signal filtering/smoothing applications, it helps to remove any high-frequency noise and produce a smooth and clean signal. In medical diagnostic equipment, it filters out any unnecessary high-frequency noise and maintains the right level of accuracy. In temperature controllers, the capacitor helps to regulate the temperature and ensure the device operates at its maximum efficiency.The working principle of the E81D500VNN562MR40T is based on the principle of electrolytic capacitance. In general, a capacitor consists of two parallel conducting plates (or electrodes) that are separated by a dielectric material. When a positive voltage is applied to the plate, it stores electrical charge in its dielectric material. The amount of charge stored is known as capacitance and is measured in Farads. When a negative voltage is applied, the electrical charge is released from the capacitor and flows back in the opposite direction.The E81D500VNN562MR40T works in a similar manner. The two electrodes are made of aluminum and are separated by a dielectric material. A sulfuric acid electrolyte is used to provide a low resistance path for electrons to travel between the electrodes. When a voltage source is applied to the capacitor, an electrostatic charge forms between the two electrodes. This charge is stored in the dielectric material and is known as capacitance. The capacitor can then store and release electrical energy depending on the amount of charge stored and the applied voltage.Aluminum electrolytic capacitors are widely used in the electronics industry due to their low cost, long life expectancy, and good performance. The E81D500VNN562MR40T is a specific type of capacitor that has a wide range of application fields and working principles. It is mainly used for power supplies, electronic buzzers, signal filtering/smoothing applications, medical diagnostic equipment, and temperature controllers. It works on the principle of electrolytic capacitance, whereby a charge is stored in the dielectric material of the capacitor when a voltage is applied to its electrodes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description