EKXF451ELL330ML25S

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.043" (26.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	980mA @ 100kHz
Ripple Current @ Low Frequency:	392mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	KXF
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	20000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	450V
Tolerance:	±20%
Capacitance:	33µF
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors (also known as aluminum electrolytic capacitors, and referred to as AL capacitor) are a kind of electrolytic capacitors, which are one of the most commonly used types of capacitors and are widely used in various types of electronic circuits. EKXF451ELL330ML25S is one of these aluminum electrolytic capacitors. It is capable of withstanding a maximum voltage of 25V and has a capacitance of 330uF. It is a large can style electrolytic capacitor with a snap-in design. With its high capacity and good stability, EKXF451ELL330ML25S is widely used in various industries and applications.

Application Field

EKXF451ELL330ML25S is widely used in various industries and applications. Its most common application is for filtering and energy storage in electronic systems. It is especially suitable for applications with high ripple current and low impedance. EKXF451ELL330ML25S is also widely used in power supply and lighting circuits such as for the switch mode type. It is used to reduce electrical noise that comes from switching circuits and to store energy. In addition, it can also be used in audio and signal circuits to reduce electrical noise and for voltage stabilizing.

Working Principle

The working principle of EKXF451ELL330ML25S is based on the same principle as other aluminum electrolytic capacitors. It uses an electrolyte that is filled between the anodic and cathodic layers and filled with an aluminum oxide film. The anode and cathode layers are separated by the electrolyte material, while the oxide film acts as an insulator. When a voltage is applied to the capacitor, the anode attracts positive charges while the cathode is attracted by negative charges. The positive and negative charges flow through the oxide film and are stored in the capacitor between the two electrodes. This stored charge is what is known as the capacitance, and the size of the capacitance is determined by the size of the electrode layers and the electrolyte material used. The larger the capacitance, the higher the energy storage capacity of the capacitor will be.

Conclusion

In conclusion, EKXF451ELL330ML25S is a large aluminum electrolytic capacitor with a capacitance of 330uF and a maximum voltage of 25V. It is widely used in various industries and applications for filtering and energy storage in electronic systems. Its working principle is based on the same principle as other aluminum electrolytic capacitors, where an oxide film acts as an insulator and allows charges to build up between the two electrodes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description