EKZN6R3ELL821MHB5D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are among the most widely used types of capacitors due their low cost, large capacitance and low equivalent series resistance (ESR). They are also commonly referred to as an EKZN6R3ELL821MHB5D capacitor. The EKZN6R3ELL821MHB5D capacitor is an aluminum electrolytic type capacitor with a type of metallic electrolyte, usually a solution of boric acid, being the electrolyte for these capacitors. It is a two terminal component with two leads used to form a connection between them.

The EKZN6R3ELL821MHB5D capacitor has an anode and cathode, with the anode composed of an aluminum oxide layer and electrolyte charge, while the cathode is made up of a tin oxide layer with a distinct layer of electrolyte between them. This creates a dielectric barrier between the two terminals, allowing electricity to flow through the capacitor but preventing current flow in the reverse direction.

The aluminum oxide layer of the EKZN6R3ELL821MHB5D capacitor acts as the dielectric layer, while the reverse bias voltage applied to the capcitor allows it to store electrical energy. This property allows the capacitor to have a long life and be useful in circuits for high frequency applications.

The EKZN6R3ELL821MHB5D capacitor can be found in a variety of applications such as power supplies, audio systems, and computer electronics. It is especially abundant in high frequency applications such as power amplifiers and signal processors. It is also often used as a decoupling capacitor in high frequency AC circuits where the capacitors are used to short out high frequency noise.

The working principle behind the EKZN6R3ELL821MHB5D capacitor is that when the voltage applied to the capacitor is below the rated working voltage, the charges on the anode layer repels the electrons, thus stopping them from reaching the cathode, resulting in no current moving through the dielectric, hence no charge on the plates. When a reverse voltage is applied, the electrons passes through the dielectric and on to the cathode, thus resulting in a charge on the capacitor.

The EKZN6R3ELL821MHB5D capacitor is one of the most common types of electrolytic capacitors and is used in a variety of applications. It’s inexpensive, large in capacitance, and has a low ESR, making it particularly useful for high frequency applications. It is available in a range of sizes, from miniature to large capacitors, as well as a variety of voltages.

The specific data is subject to PDF, and the above content is for reference