EKZN800ELL181MJ20S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electrical components used in a wide variety of electronic and electrical applications which involve the transfer of current from one component to another. Aluminum electrolytic capacitors provide a bridge between the two connected terminals and the electrolytic solution which surrounds the electrodes. This bridge allows the current to flow without resistance or without introducing any excess heat. The di-electric material of the capacitor is usually an aluminum oxide film that is coated with a thin layer of insulating material. The two sides of the capacitor are usually connected with two thin aluminum foil strips with a thin protective coating of insulation between.

The EKZN800ELL181MJ20S aluminum electrolytic capacitor is designed for a wide variety of applications including filtering before system power supplies, memory backup, signal coupling, power decoupling, and motor drive filtering. It is a surface-mountable device with a cylindrical shell and operates in temperatures from -55 to +105 degrees Celsius. The capacitor has a capacitance of 0.002µF, an operating voltage of 16V and a short-time pulse voltage rating of 40V.

When the EKZN800ELL181MJ20S is used in filtering applications, it acts as a barrier that restricts the flow of high frequency current. This prevents unwanted interference from entering the filtered system and prevents undesired signals from leaving the system. The capacitor also acts as a low-pass filter, reducing the peak voltages that the system sees, which helps to increase the life of components. The capacitor also prevents arcing and other undesirable phenomena related to high frequency currents.

The EKZN800ELL181MJ20S aluminum electrolytic capacitor is designed to be used in an application that requires a low-impedance connection. This means that it should be connected as close to the user systems power and ground sources as possible, which reduces the inductance and resistance of the circuit connection. The capacitor also requires regular maintenance, such as periodic cleaning and desoldering of the terminals, to ensure that there is no corrosion or other degradation of the connection.

When used in motor drive applications, the capacitor acts as a dc link capacitor, allowing smooth and efficient transfer of current from the energy source to the motor. The capacitor prevents excessive arcing or sparking on the connection points and also helps to reduce mechanical vibration and noise in the system. The capacitor should be properly sized and chosen so that it can handle the power requirements of the motor and provide the necessary filtering.

The working of the EKZN800ELL181MJ20S aluminum electrolytic capacitor is based on Faraday\'s law. This law states that the current passing through a capacitor and the voltage across it are proportional to each other. When a current passes through the capacitor, the voltage across it is increased, allowing energy to be stored and then released in a controlled manner. This energy can be used to power electronic components such as motors, and can also be used to filter out noise and other undesirable electronic signals.

The EKZN800ELL181MJ20S aluminum electrolytic capacitor is a versatile device that is used in a wide variety of applications. It provides good filtering performance and is relatively easy to install and maintain. It also provides good reliability and is able to withstand temperatures up to +105 degrees Celsius. For this reason, it is an excellent choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference