EL240A20-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The EL240A20-24 is a solid-state relay (SSR), also known as a Solid State Contactor, which has been widely used in industrial, commercial, and consumer areas. It is a contactless, non-moving, sealed unit, capable of switching high current in both AC and DC circuits.

The circuit contains two separate parts, an input control section and an output switching section. The input section is usually made of an opto-isolator, a switch, opto-coupler, transistor or triac, and the output section is generally made of a thyristor or triac. This relay is designed for controlling AC loads due to its low drive power requirements, long life, and fast switching speed.

The primary application field of the EL240A20-24 is in the industrial automation. It is suited for general purpose control circuits and can be used in a variety of applications such as manufacturing, motor control, and programmable controllers. It can also be used for controlling heating and lighting systems in domestic and commercial installations.

In terms of operation, the EL240A20-24 includes a built-in zero-cross detector and integrated over-voltage protection. When an input signal is generated, the detector recognizes the zero-cross and begins to activate the output switching section, which then switches the load current. The output of the relay is disconnected as soon as the signal level drops below the zero-cross level.

The EL240A20-24 is a cost-efficient and reliable alternative for the conventional electromechanical relays. Compared to electromechanical relays, these components are unaffected by vibration, have a shorter response time, reduce heat losses, are less prone to failure due to contact erosion, and offer superior noise immunity and stability. Furthermore, the EL240A20-24 saves energy because it is designed to draw a current of less than 1 mA when in operation.

In summary, the EL240A20-24 Solid-State Relay is a low-cost, reliable, and power efficient device used for switching higher voltage and current that are common in most industrial control circuits. It is a cost-efficient alternative to antiquated electromechanical relays and offers numerous benefits such as faster response times, higher reliability and better noise immunity. The EL240A20-24 is a component that should be taken into account when constructing an automated system.

The specific data is subject to PDF, and the above content is for reference