EL240A30R-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are a type of electronic switch which switch on or off the electrical current using no mechanical parts. The EL240A30R-24 is a non-latching SSR which can be used for a wide variety of applications, such as lighting control, motor speed control, and temperature measurement. It can control up to 30A of AC current and is designed for use in 24V DC systems.

The EL240A30R-24 consists of five parts: the semiconductor switching device, an input circuit, an output circuit, an isolator and a heat sink. The semiconductor switching device is typically made up of two field effect transistors (FETs), and works by using the gate to turn the FETs on or off. The input and output circuits provide isolation and protection for the SSR. The isolator provides isolation between the input and output circuits, while the heat sink dissipates the heat generated by the FETs while they are switching.

The EL240A30R-24 is designed to work with either DC (direct current) or AC (alternating current) input signals. In the DC mode, the SSR is used to control a load with a DC signal which is or is not affected by the load current. In the AC mode, the SSR is used to control a load by converting the AC input signal into a DC control signal.

The EL240A30R-24 has two modes of operation: latching and non-latching. The latching mode is used when the load is to be switched on or off on a regular basis. The non-latching mode is used when the load is to be switched on or off temporarily.

When the input signal to the EL240A30R-24 is either a DC or AC signal, it is detected by the input circuit. The input circuit then produces a control signal which is sent to the semiconductor switching device. The semiconductor switching device then switches on or off the load by applying voltage to the load line. When the load line is not connected, no current will flow and the switch is in an OFF state. When the load line is connected, current will flow and the switch is in an ON state.

The EL240A30R-24 is a versatile SSR and can be used for a wide variety of applications where precise control is needed. It is designed for use with loads of up to 30A and can be used with either DC or AC inputs. It is also designed to be used in temperature measurement systems, motor speed control systems, and lighting control systems.

The specific data is subject to PDF, and the above content is for reference