EL817(S1)(A)(TD)-VG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output - are electrical components of all circuit diagrams intended to isolate electrical circuits from one another. They are also referred to as Opto-Insulators, and some manufacturers call them isolators. The EL817(S1)(A)(TD)-VG is an example of an Opto-isolator and is used in a range of applications.

The EL817(S1)(A)(TD)-VG is an optoisolator with a Phototransistor-type output. It is used to provide electrical isolation of a control circuit from the high side of the main power supply. The device consists of an infrared light emitting diode (LED) and a phototransistor. The LED is driven by an input voltage source which is typically 5V, 9V, or 12V. The LED outputs light when activated, and this illuminates the base of the phototransistor, which then in turn switches to an “on” state. The phototransistor can then be used to control circuits as it now has a direct connection to the higher voltage on the main power supply.

The EL817(S1)(A)(TD)-VG optoisolator is typically used in applications such as motor control, heating, and air conditioning systems, and industrial process control. The device is also used in consumer electronics, where it is used to control the power supply of a device, such as a TV. It can be used in any application which requires electrical isolation between two circuits.

The working principle of the EL817(S1)(A)(TD)-VG is relatively straightforward. The LED is driven by an input voltage source, typically 5V, 9V, or 12V. The LED then outputs light when it is activated, which then illuminates the base of the phototransistor. The phototransistor can then be used to control circuits, as it now has a direct connection to the higher voltage on the main power supply. The phototransistor is able to switch on and off in response to the LED input, thus providing electrical isolation between the two circuits.

In conclusion, the EL817(S1)(A)(TD)-VG is an optoisolator with a Phototransistor-type output. It is used to provide electrical isolation between circuits whilst still allowing control circuits to be controlled by a higher voltage on the main power supply. It is used in a range of applications such as motor control, heating, air conditioning systems, industrial process control, and consumer electronics. The device works by receiving an input voltage which drives the LED, outputting light which illuminates the base of the phototransistor, enabling it to control circuits by switching on and off in response to the LED input.

The specific data is subject to PDF, and the above content is for reference