ELXS251VSN331MP30S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are well established components in all areas of electronics. Among these are the ELXS251VSN331MP30S aluminum electrolytic capacitors, which are widely used for smoothing, timing and general energy storage applications. It is common to see these capacitors in audio amplifiers, motor controllers, and other equipment.

The ELXS251VSN331MP30S aluminum electrolytic capacitor is a surface-mounted component, making it very versatile. It measures 10.4mm × 11.5mm × 10mm, and has a temperature range of up to +105°C. It has a voltage rating of 25V, and can handle voltages up to 31V.

The capacitor consists of two aluminum layers separated by a dielectric layer of nylon. The layers store electrons when a voltage is applied between them, and the capacitor is then said to be "charged". These layers store a charge despite being connected to a power source, as the electrons are "trapped" between them. When the voltage applied to the capacitor is greater than the stored charge, current will flow through the layers, putting them into a state of discharge.

For power smoothing applications, ELXS251VSN331MP30S aluminum electrolytic capacitors function in tandem with rectifier diodes and chokes. A choke limits the amount of alternating current (AC) that can flow through the circuit, whereas a rectifier diode will only allow current to flow in one direction, rectifying the AC. The capacitor then charges up when current is flowing, and so forms a reservoir of energy.

This reservoir of energy is then slowly discharged when there are small drops in the voltage supply, thereby smoothing out these "hills and valleys" in the voltage and reducing the risk of damage to any equipment connected to the circuit.

ELXS251VSN331MP30S aluminum electrolytic capacitors also find use in timing applications, where they are placed in series with a resistor and a light dependent resistor. In this configuration, the capacitor stores charge when the input voltage is present. When the input is switched off, the capacitor is allowed to slowly discharge through the resistor, forming a timed switch. This can be use to allow a lamp to remain on for a certain amount of time before switching off.

Finally, these aluminum electrolytic capacitors can also be used for general energy storage applications. These capacitors are more efficient than cheaper types due to their lower equivalent series resistance (ESR). This helps to reduce power dissipation and ensure reliable operation.

In conclusion, ELXS251VSN331MP30S aluminum electrolytic capacitors are versatile components that can be used for a variety of applications, such as power smoothing, timing and general energy storage. They are surface-mounted components, with a voltage rating of 25V and a temperature range of up to +105°C. They are more efficient than cheaper types due to their lower ESR.

The specific data is subject to PDF, and the above content is for reference